answersLogoWhite

0

To keep from damaging the thrust bearing if the lubrication system fails to cool it sufficiently. The surfaces of thrust and journal bearings is a metal called babbit. Babbit metal is an alloy of tin, lead, copper and antimony, typically. This metal has a high "lubricity" value (meaning it is slippery) and oil is used to create a wedge or film, to stabilize the shaft in position, which decreases as the oil gets hotter. Babbit will also melt at low temperatures, so temperature trips are in place on each bearing to prevent damaging them.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Can Steam Turbine Thrust Bearing temperature protection device be considered a similar protection for the Steam Turbine Rotor Position protection device?

No these are two different sensors. The thrust bearing temperature trip device measures either the metal temperature of the bearing, or the oil temperature exiting the bearing, or both. If this temperature exceeds recommended temperatures by 10 to 15% the turbine will trip to avoid damaging the bearings or shaft. The rotor position sensor is a proximity cell that monitors the axial position of the turbine rotor, often there is four such sensors mounted at the end of the rotor, if the distance between the sensors and the rotors exceeds a specific distance ( often 15-30 mils) the sensors indicate a failure, if two or three sensors indicate failure the turbine will trip.


How do you tell if main thrust bearing is bad?

You can tell if the main thrust bearing is bad by simply checking out the oil. If you notice little metal particles, chances are the thrust bearing has spoiled.


What is a steam turbine jacking oil system?

at the time of turbine start up, the shaft journals are in contact with the white metal of the bearings due to the weight of the rotor. The low pressure of the lubricating oil supply when the set is stationary is insufficient to stop the metal to metal contact between journals and bearing shells. In order to prevent the metal to metal contact between journal and bearing shell during start up, which is damaging in the long term, an oil pocket machined into the bottom shell of the journal bearing is supplied with oil under high pressure. This lifts the shafting system slightly and it floats on a film oil. this is called jacking oil system of turbine


What type of bearing to use for no metal on metal contact?

Sleeve bearing


What has the author Francis S Stepka written?

Francis S Stepka has written: 'Analysis of uncertainities in turbine metal temperature predictions' -- subject(s): Cooling, Airplanes, Turbine-propeller engines


Why to out bleed steam in turbine?

When steam contains liquid droplets while doing work at high temperatures, the water droplets can etch metal. To combat this, steam can be superheated or the pressure of the system is reduced.


What is metal shots?

bearing


How do you calculate white metal bearing clearances?

There is no simple formula to calculate the metal bearing clearance. Manufacturers must specify the clearance for each individual bearing.


How many ball bearings are there in the world?

AnswerYou will have to do some research. number of manufacturers and their production levels. example: Timken Bearing: produced 2.5 billion ball bearings in 1998. : Stats are their are 80%-90% still in service and those not are in junk yards.You have a lot of work ahead of you if you really need to know this answer.It depends on bearing qualities the manufacturing of bearings depends on demand. the different varieties are-Taper Roller Bearings, Deep Groove Ball Bearings, Cylindrical Roller Bearings, Spherical Roller Bearings, Spherical Thrust Bearings, Clutch Release Bearings, Needle Roller Bearing, Self Aligning Ball Bearings, Angular Contact and Double Row Bearings, King Pin Bearings, UCP Pillow Block, Water Pump Bearing, Ball Bearing Manufacturers, Metal Bearing exporters, Roller Bearing, Needle Bearings, Automotive, Roller High Precision Manufacturers, THRUST BALL BEARING, Automobile Bearing, Thrust Bearing, Roller Bearing Cylindrical Manufacturers, Needle Bearing Cages Manufacturers, Engine Bearings Manufacturers, Elevator Part Bearing Hanger ManufacturersVisit Us At http://www.arb-bearings.com


What is a metal bearing mineral?

ore


What is the name of a metal bearing rock?

ore


The vanes in curtis turbine are made of what metal?

Probably stainless steel alloy...

Trending Questions
Why is your airbag icon lit in the dashboard? How does the alcohol based liquid to clean windshields help keep the water in the cleaning fluid from freezing on the windshield? Where is the crankshaft sensor on a 1999 Dodge Neon located? Do you need the twist cap on your gasoline tank to drive your car? Can you bypass a gm fuel composition sensor? What are resistor spark plugs.? Where is your alternator for a 2002 suzuki aerio? What is wrong about fram and supertech oil filters and is supertech full synthetic oil also bad? Where can i find a Serpentine belt diagram for ford transit 2000 model? How much does it cost to replace an alternator on Kia Sportage 2001? What part of speech is the word repaired? Can connecting a car battery the wrong way drain the battery? Antifreeze is leaking from the intake manifold what causes this? Why won't the 4 wheel drive engage after removing the battery for cleaning in a 2002 ford explorer I have checked the fuses relating to 4wd and found them to be fine? Why is my Ford's fuel pump noisy? How do you diagnose an overheating problem on a 93 grand am quad 4 we have relaced the radiator and the thermostat? Where is the clutch safety switch on a 1996 Camaro Z28? What is tire size for a 1994 Chevy Caprice? Does Yahoo Mail have any way of allowing the account holder to filter out who emails them? 96 Cavalier- check engine light indicates engine running lean due to camshaft sensor malfunction- would this cause the car to stall in high temps able to restart and drive after engine cools?