0
What else can I help you with?
Why would you not heat the steam coming out of turbine and feedback to turbine?
Steam is redirected back into the boiler from the high-pressure turbine for reheating, but the steam from the low-pressure turbine enters into a condenser to become water again.
What is heat rate of steam turbine How to calculate heat rate of steam turbine?
manish
What is positive axial displacement of steam turbine?
axial shift of a steam turbine is the shifting of turbine rotor in the forward and backward direction due to steam thrust on blades of rotor.
What is a steam turbine?
It is an engine.A steam turbine is a heat engine that uses the expansion of steam passing through stationary nozzles and blades on a shaft to turn the shaft. The steam can move through the turbine axially (one end of shaft to the other end), radially (shaft to outer casing), or tangentially (around the outer edges of the turbine wheel). In an impulse turbine, the steam is expanded in nozzles and pushes the blades. In a reaction turbine the steam is expanded in the nozzles AND in the blades, the reaction of the expansion of the steam pushes away from the blades spinning the wheel in the process. The expansion of the steam is necessary to increase its velocity through the turbine.
What is lp and hp heaters?
In regenerative cycle LP/HP heaters are used to raise condensate/feed water temperature by extracting/bleed steam from LP and Hp stages of steam turbine in order to improve the efficiency of the plant
What the difference between extraction and bleeding in steam turbine?
bleed is amount of steam output from turbine through pipe and exit from final stage of turbine . this bleed enter to feed water heater (low and high) and deaereator to increase unit efficiency or rather bleed is the amount of steam drained out of the steam turbine during the expansion of steam and this rejected heat energy is used to heat the feed water supplied to the boiler...........
Why extraction taken from steam turbine?
Why extractions are taken out from steam turbine.
Why would you not heat the steam coming out of turbine and feedback to turbine?
Steam is redirected back into the boiler from the high-pressure turbine for reheating, but the steam from the low-pressure turbine enters into a condenser to become water again.
What are the preventive maintenance of steam turbine?
The preventive maintenance of steam turbine mainly entails frequent servicing of the parts. This will ensure a smooth performance of the steam turbine.
What is heat rate of steam turbine How to calculate heat rate of steam turbine?
manish
What type of cycle used in steam turbine?
Rankine cycle is used in steam turbine
Why you are maintain the vacuum in steam turbine explain me briefly?
why we are maintain vacuum in steam turbine at steam outlet or exhaust side
Nozzle clearance how to steam turbine?
Steam turbine nozzle clearance is the total energy content available in steam. This is through a valve.
What causes steam turbine governor hunting?
inconsistent load will cause steam turbine hunting.
What is positive axial displacement of steam turbine?
axial shift of a steam turbine is the shifting of turbine rotor in the forward and backward direction due to steam thrust on blades of rotor.
How TO generate electricity from steam?
To generate electricity from steam, a steam turbine is typically used. High-pressure steam is directed onto the turbine blades, causing the turbine to spin. The spinning turbine is connected to a generator, which converts the mechanical energy into electrical energy.
How does steam turbine works?
Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
