Overspeed is usually the result of too small of a turbine housing/wheel used.
A turbocharger is driven by the energy in the exhaust gasses from the engine.
NO. Are you mad, no stock motorcycle have turbocharger
The turbocharger was invented by Swiss engineer Alfred Büchi in 1905.
in this earth lah
dont use it
Yes, the engine oil is shared with the turbocharger for both lubrication and cooling.
how do fix overspeed problem on genorater
It can overspeed.
You should never run any engine with a faulty turbocharger. The oil in the turbocharger can catch on fire. You will need to either fix the turbocharger or remove it.
Smoking, knocking and major oil loss are the major symptoms of a turbocharger failure.
Exhaust temp has an effect on the output of a turbocharger cooler the exhaust the better performance you get.
Run the turbine up to about 75% speed and trip it manually. Reset the trip linkage. Restart the turbine. Adjust the governor up until the overspeed trip mechanism trips the stop valve. Watch the tachometer, the overspeed trip should activate within 10% over the maximum allowable speed of the turbine, if it doesn't trip it manually and repair the trip.