The switch on the brake pedal is disconnected or defective. The shifter interlock has to get a signal from the switch to know the pedal is being pressed before it will release the shifter.
do your brake lights work wen pressing brake . if not its the brake pedal sensor
what kind of vech.
Check the ground wire. You have a bad connection somewhere.
Check the fuse first, then the brake bulbs. When you press the brake, it senses the brake lights and let's you take it out of park. This happened to me - 2 brake lights burnt at the same time with one already gone, and I couldn't get it in gear. I replaced the bulbs, touched the brake pedal and she went into gear no problem.
Defective or misaligned brake light switch.
A brake light switch may be bad if a 1996 Toyota Corolla will not go into gear and the brake lights don't work. Another issue could be in the shift lock solenoid.
check the bulbs to see if there burnt and check your fuses
Check bulbs they are double filamented smaller for brake lights larger for tailights Check the fuse Check the operation of the stoplight switch
Break lights come on when you step on the break, they do not come on when the head lights are turned on.
wiring harness to roof brake light has been fried. Brake lights don't work, cruise control doesn't work, unable to move shifter from park. Transit Connect 2010
Sounds like a bad Brake Light Switch. It's located on the steering column.
check that you have double filament bulbs in tail lights