Take it to autozone and have the altermator checked out for free. It is probably bad.
Increase the voltage to the light, and it will become brighter.
if the light get brighter when your driving then its your alternator so a new one will be needed
Could be an alternator issue.
Mirrors increase light in a room by reflecting and redirecting the light that enters the space, effectively spreading it around and making the room appear brighter.
The voltage regulator (which is inside the alternator) on 97 rodeo's are controlled via the PCM/ECM (Power Control Module/Engine Control Module). A remanufactured alternator for the 97 Rodeo as well as the 97 Passport (Honda), usually will fhow failure while tested in car. On the bench test, however, the alternator tests normal. Aside of the normal problems to be ruled out, ie; alternator belt tension, check for loose connections within and around the alternator, try an original factory alternator. Is this problem affecting your blower motor?
As the bulb becomes brighter, more current flows through the filament, increasing its temperature. This increase in temperature causes the filament to glow more intensely, resulting in a brighter light output.
when all three of those lights turn on that means that your alternator is bad. i just went threw this same problem with my rodeo
Yes, the resistance of a filament light bulb increases as the bulb gets brighter. This is due to the increase in temperature of the filament, which causes the resistance to go up.
your alternator was never the problem. Its your battery and/or charging system. the reason the lights get brighter is because the car isn't getting the propper amount of energy from the battery and is having to directly draw off of the alternator. when the engine is rev'ed the alternator spins faster creating more current to charge the battery, witch is why the lights brighten at higher rpms.
You seem to be talking about a light wave. If you increase the amplitude the light gets brighter, and if you decrease it gets dimmer. Amplitude has no effect on colour.
You seem to be talking about a light wave. If you increase the amplitude the light gets brighter, and if you decrease it gets dimmer. Amplitude has no effect on colour.
You seem to be talking about a light wave. If you increase the amplitude the light gets brighter, and if you decrease it gets dimmer. Amplitude has no effect on colour.