0
What else can I help you with?
Your 1991 Toyota Camry cv joint is making a ticking noise when the gear is in drive only?
Check the "boot" for cracks and see if there is any loss of grease. The boot is the rubber housing around the CV Joint. If the boot is damaged, grease has escaped and the CV Joint is making noise, the CV joint must be replaced.
Why is a Malibu making a popping noise when you turn the steering wheel?
More than likely you have a constant velocity joint going bad, these are on the end of the drive axles that connect to the inside of the front wheels. Sometimes if they are not worn badly the joints can be repacked with grease and new boots installed, but usually it's better to replace them.
What happens when grease is coming out of the cvc joint?
I think you mean a cv joint,without grease it will cease up and will make a knocking/grinding noise. If not replaced quickly it can less to bigger problems..
What is the knocking noise when you turn right in a Chevy Venture?
It might be a CV joint, when the CV boot is ripped and the grease is partly gone , then it makes noise.
Can a cracked CV boot cause noise in the CV joint?
A cracked boot itself won't cause a CV joint to make noise. However, a cracked boot WILL cause the grease to be slung out and allow dirt to enter the CV joint. And a contaminated CV joint that is starved for lubricant WILL eventually start to make noise.
Why is my universal joint squeaking?
Because it needs grease. If it squeaks or clicks or makes noise it needs replacing. OEM ones may not have a grease fitting, replacements normally do.
What would cause a knocking or clunking noise from rear tires when turning?
You probably need your bearings repacked
Will a CV joint make a squeaking noise when your truck is in motion?
Yes, a CV joint can make a squeaking noise when your truck is in motion, especially if it is worn or damaged. This noise often occurs during turns or when accelerating, indicating that the joint may need lubrication or replacement. Other potential issues, such as a lack of grease or damaged boots, can also contribute to the noise. If you notice this sound, it's advisable to have the CV joint inspected by a professional to prevent further damage.
What are the consequences of having a bad cv joint for a 04 lancer ralliart?
noise, vibration, grease leaking & if long enough it can cause severe damage
Grinding noise on left turns and less noise on takeoff no noise on right turn Ram 2500 Van where do you start drivetrain?
RHS front wheel bearing I would say or RHS CV joint, examine the rubber booths on all cv joints and if yhey are dry they are ok, if they are grease spattered this means that there is a fractured booth and centrifical force will throw the grease out and the cv joint runs without grease thus wearing the ball and socket cv joint. If the boots are dry put some glycerene on a rag and rub into them this keeps them supple and won't crack This could also be a bad wheel bearing. Wheel bearings, when bad, are known to only make noise at certain times, such as when turning.
Why do musicians wear transmiters in their ears?
because the noise gets louder and louder and it can damage your hearing
What causes a clanking noise when steering wheel is on full lock on a citroen saxo?
its the cv joint it gives a click,click,click noise on full lock sometimes pushing grease into them helps but usually needs replacing.
