0
What else can I help you with?
Where is the exhaust manifold located on a 1997 Dodge Avenger?
More information is needed to answer this question properly, such as; is the engine a 4 or 6 cylinder. In the case of a 6 cylinder, their are 2 exhaust manifolds; the front exhaust manifold is located under the hood between the radiator and the engine: when you check your oil level by grasping the dipstick your hand will be just a few inches above the exhaust manifold. Basically, follow the exhaust pipe(s) to the engine and where it connects to a device that splits the exhaust 3 or 4 ways, that device is your exhaust manifold.
Where do you find the front oxygen sensor on 1998 Chevy venture minivan?
On the right rear of the exhaust manifold ( behind the exhaust manifold) , you will have to turn the engine to get to it . (* check out chilton manaul for 98-? for vans and trucks .
How do you remove the exhaust manifold?
To remove the exhaust manifold, first ensure the engine is cool and disconnect the battery. Begin by removing any components obstructing access, such as the intake or heat shields. Then, detach the exhaust pipes and unbolt the manifold from the engine block, carefully lifting it away. Finally, check for any gasket debris and clean the surfaces before installing a new manifold.
What is the ticking sound in your Chevy truck its not the engine block?
check for exhaust leaks around the manifold inlets and outlets.
Can a vacuum leak at the manifold cause the check engine light to come on?
Yes
What causes the check engine light to come on your 1994 Nissan pickup 4 cylinder engine?
your oxygensensor is bad ,its screwed in to your exhaust manifold, about 30.00
How to replace an exhaust manifold on a pontiac grand prix 3.1 liter?
To replace the exhaust manifold on a Pontiac Grand Prix 3.1-liter, start by disconnecting the battery and removing any components obstructing access, such as the intake manifold or engine cover. Next, unbolt the exhaust manifold from the engine block and carefully detach it from the exhaust pipe. Clean the mating surfaces, then install the new manifold with a new gasket, tightening the bolts to the manufacturer's specifications. Reassemble any removed components, reconnect the battery, and check for leaks before starting the engine.
Will a blocked exhaust pipe cause check engine light to come on?
It could.
Will a 305 exhaust manifold fit on a 350 engine?
A 305 exhaust manifold will physically fit onto a 350 engine, as both are part of the small-block Chevy family and share similar mounting points. However, the performance may not be optimal, as the 305 manifold is designed for a smaller engine and may restrict exhaust flow compared to a manifold designed for a 350. It’s advisable to use a manifold specifically designed for the 350 to maximize performance. Additionally, check for any clearance issues with other components in your setup.
What can cause white smoke from the exhaust only when car is hot you have taken the exhaust manifold and not smoke is coming from the engine this is a sr20det engine turbo coolant levels have not Chan?
have a mechanic check your turbo.most will tell u that a turbo blows black smoke but can aslso blow white smoke when turbo is malfunctioning
How do you change exhaust manifold on 2001 olds?
To change the exhaust manifold on a 2001 Oldsmobile, first, disconnect the battery and remove any components obstructing access to the manifold, such as the intake or engine covers. Then, detach the exhaust pipes and unbolt the manifold from the cylinder head while ensuring you have a proper gasket for reinstallation. Replace the old manifold with the new one, reattach the exhaust pipes, and reconnect any components you previously removed. Finally, reconnect the battery and check for any exhaust leaks.
How do you repair2005 Nissan Armada exhaust manifold?
To repair the exhaust manifold on a 2005 Nissan Armada, first, ensure the engine is cool and disconnect the battery. Remove the necessary components, including any heat shields or exhaust pipes, to access the manifold. Inspect for cracks or damage, and if needed, replace the manifold with a new or refurbished one, ensuring all gaskets are replaced. Finally, reassemble everything, reconnect the battery, and start the engine to check for leaks.
