0
What else can I help you with?
How do you get better mpg on a Honda Prelude?
You can do things such as fill up better, higher octane fuel, change the air filter from stock to an afternarket filter, using fuel additives, or changing your stock intake itself to an aftermarket intake.
Why are you using bleeder resistor in LC filter?
In LC filter , Bleeder resistance is connected in Parallel with the load to maintain the minimum current through the choke and so the performance of the Filter improves.
What are the downfalls of using a cold air intake?
Hydrolock. Because the intake is much closer to the ground if you go through a large puddle there is a chance the intake will suck in the water causing the engine to seize. This can be avoided by running a WAI or Short Ramm or by using a hydrobag to cover the filter or an AEM bypass valve.
What are the benefits of using a water filter for a dishwasher?
Using a water filter for a dishwasher can help improve the cleanliness of dishes by removing impurities and minerals from the water. This can result in cleaner dishes, reduced spotting, and improved overall performance of the dishwasher.
Repair the Intake System?
form_title=Repair the Intake System form_header=The intake system helps keep the engine running at top performance. Has your car intake system every been repaired before?= () Yes () No Do you want us to check out the complete car intake system when we do repairs?= () Yes () No Will you be using insurance to pay for these repairs?= () Yes () No
How do you tell which is the intake side on a home AC unit?
turn on the unit in question and then using you hand just feel for where hot air is getting sucked in. Also using a piece of paper can tell you where the intake is since the paper will stick. >>>>> Find the filter, it is on the inlet (return) side of the unit.
Can you use PVC pipe for air intake?
As long as you can seal the ends and route it, there isn't a problem using it. It will survive the engine heat. There are rubber connectors available for plumbing that could be used to connect the ends to the filter box and the intake.
What are the differences between a furnace filter and an AC filter, and how do they impact the efficiency and performance of the heating and cooling systems?
A furnace filter is designed to capture larger particles like dust and debris, while an AC filter is more efficient at trapping smaller particles like allergens and pollutants. Using the correct filter for each system can improve air quality and prevent damage to the equipment, leading to better efficiency and performance in heating and cooling systems.
What are some benefits of using an Eheim external filter in one's fish tank?
The benefits of using an Eheim external filter in one's fish tank are many. It offers flexibility in terms of space management. Also, it has high water throughflow performance and energy consumption is low.
What is the assay method for oxalic acid?
The assay method was developed by using high performance liquid chromatography. The plasma is separated by passing through an ultra filter.
Does a cold air intake system improve performance and mileage on a 2002 Toyota forunner and what is the best colad air intake for the car?
There are many reasons to add a cold air intake but performance and mileage are the two main one. However, you need to know that in application the two work against each other. Too get more performance you need more air AND more fuel so to get one you need the other. Performance intakes help with gas mileage by letting the engine breathe easier, so your mileage increases... AS LONG as you drive the same way you would. So, all things being equal you will have better mileage and better performance with a cold air intake depending on which one you are using it for at the time. Click on the link if you are looking for an intake for your Toyota 4Runner. Cheers, GPI Performance.com
Is there someone who is willing to edit a single photo. the smile needs fixed preferably by taking the smile from a similar photo and placing it on the new photo?
You can add smile to face using Liquify filter, no need to replace from another.
