I had a similar problem with my 94 lebaron. There are 3 transmission speed sensors on the 3 litre V6. If that is what your car has, its possible one of these speed sensors are bad. Check your local auto parts store, im sure they could look up the sensors for you. The one i needed was less than $20 and installed easily with no special tools.
speedometer--vehicle speed sensor is in trans near pass side axle
Yes, the speed sensor operates the speedometer on a 1992 Subaru SVX. The speed sensor detects the vehicle's speed and sends this information to the engine control module (ECM), which processes the data and relays it to the speedometer for display. If the speed sensor fails, the speedometer may not function properly.
The speedometer cable on a 1992 Mazda MX3 is typically located on the transmission housing. It connects to the speed sensor, which measures the speed of the vehicle and sends that information to the speedometer on the dashboard. To access the speedometer cable for inspection or replacement, you may need to remove some components under the hood and possibly underneath the vehicle.
Is there a speed senor for my 1992 nissan 2.4L, wheel drive truck?
Will vary between 700 and 1000 rpm.
Vehicle Speed Sensor
Your alignment on the speedometer cable is off. This happens a lot on older Geos. Take it to a mechanic and have them speed test it and re fit it.
Either a problem in the circuit or a faulty vehicle speed sensor.
The fuel pump on a 1992 Chrysler LeBaron is inside the fuel tank.
Yes it has 2 speed sensors. On is in the trans. And the other is in the speedometer head.
It is in the fuse box underneath the dash. Do you have tail lights? If not, you may have a bad light switch.
Error code 3 on the speedometer of a 1992 Ford Bronco XLT typically indicates a problem with the vehicle's speed sensor or the wiring associated with it. This can result in inaccurate speed readings or a non-functioning speedometer. Checking the speed sensor's connections, as well as inspecting for any damaged wiring, is recommended to troubleshoot the issue. If necessary, replacing the speed sensor may resolve the error.