To bleed the brakes on a 1993 Oldsmobile Cutlass, start by gathering the necessary tools: a brake bleeder kit, a wrench, and brake fluid. Begin at the wheel farthest from the master cylinder (usually the passenger side rear), loosening the bleeder screw while having an assistant press the brake pedal. Allow fluid and air to escape until you see a steady stream of fluid, then tighten the screw before releasing the pedal. Repeat this process for each wheel, moving to the nearest wheel to the master cylinder last, and ensure to regularly check the brake fluid level in the reservoir to prevent it from running dry.
The fuel relay switch for 1993 olds cutless ciera is in the dashboard.
it probably doesn't have one...my 1993 doesn't My 1995 Olds Cutless Supreme SL 3.1L has a yellow trunk button in the glove box.
It's built into the computer.
The 1993 Cutlass doors lock automatically as a safety feature. This helps to keep the doors from accidentally opening or someone trying to enter your cat at a stop light.
The starter is located in the front center above the axle. 1. The first thing you want to do is disconnect the negative battery cable so nothing will short. 2. If it
Yes people do it all the time and thay look good in there.
A very dirty fuel filter could cause that.
why does my starter make a loud screeching noise when i start it?
Underneath your hood, behind the passenger side headlight, behind the core support, is a bank of 2-8 relays. One of those relays is the relay needed for your fuel pump. There will also be a fuel pump relay fuse located there.
There isn't a speedometer cable. There is a speedometer sensor,where it is located I am still trying to find out. On the tranny or in the speedometer or somewhere else?
Good luck haha..
By the caliper on top is like a 9 mm