try turning steering wheel back and forth while turning key to off position or make sure the transmission is in park (if its an automatic transmission)
yes
The 1993 Subaru Legacy 2.2 liter engine ignition timing is the sequence that allows the engine to run smoothly. The ignition timing is synchronized with the crankshaft position sensor.
To replace a broken key in a 91 Subaru ignition, you will need to contact a locksmith. The locksmith can cut a key to match your ignition.
electronic
When any car idles, it lowers the ignition energy (but not completely) to keep the car running. When it is cold outside, your Subaru's ignition energy is lost through heat because electricity also is measured through heat. When there is less ignition energy when it is already running on a lower ignition level, the car (your Subaru) is not likely to idle.
To replace the ignition switch on a 2000 Subaru Forester, first disconnect the negative battery terminal to ensure safety. Remove the steering column covers by unscrewing the necessary screws, then locate the ignition switch attached to the ignition lock assembly. Disconnect the wiring harness from the old switch and unscrew it from its mounting. Install the new ignition switch in reverse order, making sure to securely connect the wiring and reassemble the steering column covers.
maybe the ignition modual
subaru legacy engine is switched off when stop after drive
first i would check the fuse, then try a different lighter in socket, if neither of these remedies problem ginna have to take dash apart to remove socket and see what is wrong
Check out the related link for instructions on how to remove the back seat from a Subaru Impreza.
Your Subaru is misfiring when it reaches 1 bar because it has a mechanical problem.
The book I looked in has some printing missing BUT it looks like the ignition module could be mounted below the steering column. It is in some Subaru's. Hope this helps.