0
What else can I help you with?
What are the cyl head bolt torque specs for a gx390?
25 ft lb
What is the head bolt torque for a 1990 Ford Festiva 1.3?
The 1990 Ford Festiva 1.3 liter engine cylinder head bolt torque specification is 125 pounds. The cylinder head bolts should be torqued in 25 pound intervals.
What are head bolt torque specs for a 2001 Kawasaki mule?
if it is diesel engine 25 foot pounds
What are the head bolt torque specifications for a 2000 kia sportage ex 2.0 lieter DOCHS?
The 2000 Kia 2.0 liter engine cylinder head bolt torque specification is 125 pounds. The cylinder head bolts should be torqued in 25 pound intervals.
2000 s10 rocker arm torque spec 4.3?
the torque is 25 foot pounds
Suzuki jimmy 1.3 head bolt torque settings?
23-25 then 35-37 and final is 46-52 ft lbs
What are the Flywheel bolt torque specs 1961 Chevy?
25
What are the head bolt torques on a 98 suzuki esteem?
The head bolt torque for a 1998 Suzuki Esteem with the 1.6L 16 valve engine is: 1st: 25 ft lbs 2nd: 40 ft lbs3rd: 48-51 ft lbs
Saxo 1.4 Cylinder Head torque settings?
For the Saxo 1.4, the cylinder head bolt torque settings typically require an initial torque of about 25 Nm, followed by a further 90-degree turn for each bolt. It’s important to follow the specific tightening sequence recommended by the manufacturer to ensure even pressure across the head. Always refer to the vehicle's service manual for the most accurate specifications and procedures.
What is the head bolt torque on a 1979 Evinrude 6HP outboard?
The head bolt torque for a 1979 Evinrude 6HP outboard engine is typically around 20-25 ft-lbs (27-34 Nm). It's essential to follow the specific torque sequence recommended in the service manual to ensure even tightening. Always use a calibrated torque wrench for accuracy. Additionally, it's advisable to recheck the torque after initial run-in to ensure proper sealing.
What is the cylinder head bolt torque for polaris 250?
The cylinder head bolt torque for a Polaris 250 typically ranges between 20 to 25 foot-pounds, depending on the specific model and year. It's crucial to follow the manufacturer's specifications and torque sequence to ensure proper sealing and to avoid damage. Always consult the owner's manual or service guide for the most accurate information.
What are the head bolt torque specifications for a 2.4 Plymouth breeze?
25 ft lbs, 50 ft lbs, 50 ft lbs, 1/4 turn.
