0
For the Saxo 1.4, the cylinder head bolt torque settings typically require an initial torque of about 25 Nm, followed by a further 90-degree turn for each bolt. It’s important to follow the specific tightening sequence recommended by the manufacturer to ensure even pressure across the head. Always refer to the vehicle's service manual for the most accurate specifications and procedures.
What else can I help you with?
What are the torque settings for the cylinder head bolts on a citren saxo 1.1 1996?
they are all torque 20nm/15lbf ft then after all angle tightened 260 degrees
Torque settings for citroen saxo cylinder head bolts?
in sequence torque bolts to 20nm, then again in sequence turn a futher 120 degrees, and again in sequence 120 degrees.
What are the Torque settings saxo 1.0 cylinder head?
The torque settings for aluminum head are; stage 1. 15lb ft. Stage 2 you have to set the correct torque level by angular measurement, angle tighten a further 240 degrees. Cylinder head tightening sequence is important if you do not want to warp the head. Get down to your local library go to the technical section and photocopy the section from the Haynes manual
What are the head bolt torque settings on a 1.0 saxo?
stage 1 20nm stage 2 120 degrees stage 3 120 degrees
Can you find Citroen saxo head bolt torque sequence?
look in te manual :-)
What are the head bolt torque settings for citroen saxo 1.1 engine?
The head bolt torque settings for a Citroën Saxo 1.1 engine typically involve a two-step process. First, the bolts are usually torqued to around 20 Nm (15 lb-ft), followed by an additional angle tightening of 90 degrees. It's essential to consult the specific service manual for your engine variant, as specifications may vary slightly. Always ensure that the bolts are properly cleaned and lubricated before installation for accurate torque readings.
Citroen saxo rear wheel bearing nut torque?
citroen saxo 1.4. what is the rear brake hub torque setting?
Citron saxo 1.1 tappet settings?
inlet 20 exahust 40
Where is the oil filter on a citroen saxo?
on a saxo vtr the oil filter is on the right hand side of the exhaust manifold it is a black cylinder and you cant miss it you dont need to change the cylinder just the filter element inside any Q e-mail me at dan_priest.com
Which was the maximum speed of citroen saxo 4-cylinder 98HP injection 2001?
The maximum speed of the 2001 Citroen Saxo 4cyl 98HP injection car is 120 miles per hour.
Is a saxo good?
saxo is good, saxo is reliable..
Where might one find information about Saxo Bank Forex trading?
To find more information about Forex trading, contact Saxo Bank. They can reached by phone, fax and email in either Dubai or the head office in Danmark.
