0
Yes it does work. However you will also need to use the 22 lb injectors for the 350. To get the full benefits from the upgrade you should get a 350 chip burned. The computers are the same but the chips are different. This is all considering if the swap is for a lb9 (305) to a l98 (350).
What else can I help you with?
Will 305 truck heads work on a 305 car block?
yes
Will regular old style 305 heads work on a newer vortec 305 block?
The heads will fit the block, but the vortec intake manifold will not bolt to the old style heads.
Will 305 heads make more horsepower on a 350 1990ish motor with carb conversion?
No. 305's have small valves due to the 305's small bore. Large valve heads can't be used on the 305 because the valves will hit the cylinder block. 350 heads breathe MUCH better than 305 heads. Stick with the 350 heads.
Do the intake bolts bolt in the top of the block or into the heads on a 305 vortec?
Into the heads only.
Can you put a set of 307 heads on a 305 block?
Yes you can.
Is it possible to install 305 vortex heads on 350 block?
Yes their the same block....
Do 305 and 307 small block Chevy engine heads fit a 1964 283 cu in block?
Yes, they should fit ok. 305 heads should bump up the compression a little.
What small block Chevy heads can you use on a305 4bbl Chevy motor?
305 heads of course, 350 heads will fit for sure and possibly 400. obviously no big block heads will fit. a 305 with 400 heads gets you a little over 352. 350 with 400 heads is a 383. add and divide
Do the 305 vortec and 350 vortec have the same heads?
No. The 350 has bigger valves. While you CAN put the 305 heads on the 350, (I can't imagine why you would actually want to) you can NOT put the 350 heads on the 305. Because of the 305's small bore, the valves on the 350 heads will hit the cylinder block.
CAN HEads off a stock 454 engine give a stock 305 engine horse power and around how much?
Heads off a 454 engine will not fit a 305 engine A 454 is a big block and a 305 is a small block. Even if they did fit it would probably run poorly due to low compression because the combustion chambers on the the 454 heads are larger than the ones on the 305 heads
Can 1987 center bolt heads bolt up to an older 305 block?
no
Will 305 cylinders work on a 350 block?
YES. The heads will bolt right on.
