0
What else can I help you with?
You have white smoke on start up loss of antifreeze milky oil but no smoke when engine is hot?
White smoke at startup, loss of anti freeze and milky oil indicates to me a bad head gasket.
What does it mean when your car oil is milky and the head gaskets are not bad?
How do you know the gasket is not bad? f you oil is milky then there is moisture mixed with the oil. This can be a blown head gasket or a warped or cracked head.
White smoke from car?
white smoke usually means coolant is getting into the cylinders - check your oil to see if it overfull and or milky this bad news and can mean head gasket replacement or other major repair
Why is your oil milky?
Milky oil is an indication a water in the oil. Could be from a failed headgasket, a leaking oil cooler, ir a malfunctioning pcv system. Continuing to drive that vehicle in that condition will do serious damage to the internal parts and shorten the life of the engine greatly.
Your car stalls at junctions and there is oil in your water?
broken cylender head gasket. most likely water in oil as well. Is your oil milky?
What does it mean when the oil in your lawnmower looks milky or white?
When the oil in your lawnmower appears milky or white, it typically indicates that water has mixed with the oil. This can happen due to a leaking gasket, a damaged seal, or condensation buildup, which is especially common in humid conditions. Milky oil can reduce the lubrication effectiveness, potentially leading to engine damage, so it's essential to drain the contaminated oil and address any underlying issues before continuing to use the mower.
Can you drive your car with creamy oil?
No! (Laughs)
How do you know if the headgasket is blown on a 95 Toyota 4runner?
Oil is a milky colour and your exhaust is coming out white
What causes the oil to be milky in a 2002 Dodge Intrepid?
You need to replace the water pump. This happened to my car.
Can you drive your car after accidentally putting transmission fluid into your oil?
I would NOT DRIVE THE CAR. You can start it then change the oil immediatly. Transmisson oil is a great cleaner but not a very good lubricant for an engine.
94 Geo Tracker with a 1.6 overheating?
Overheating is usually caused by a bad head gasket. Check under the radiator cap for oil or milky reside. Check under the oil cap for water or white milky residue.
Why does the center lathe squirt oil?
so it wont over heat (its coolant and its not supposed to be oil... coolant is milky white) that is all i know from a shop
