No
Even though the A/C unit is outside, the breaker for it will be in the entrance panel box inside your home. It should be clearly marked.
The number of window AC units that can run on a 110-volt breaker depends on the amperage rating of the breaker and the power consumption of each AC unit. Typically, a standard 110-volt circuit has a 15- or 20-amp breaker. If a window AC unit consumes around 5-8 amps, you could theoretically run one or two units on a 15-amp breaker, but it's crucial to consider the total load and avoid exceeding 80% of the breaker's capacity for safety. Always consult an electrician for specific recommendations based on your setup.
That tells me the problem is with the outdoor unit. Most likely a dead compressor or fan motor. Additionally, your indoor and outdoor units are not on the same breaker.
The inside fan blows air through the ac coils to cool the air. It should be on a separate breaker or fuse circuit from the outside unit. See if there is a fuse box on the side of the inside unit and check the breakers in the house main breaker box. Also stand quietly beside the inside unit and listen for the fan motor running. If the motor is heard running then either the fan drive belt has broken, or the ac coils are clogged preventing air from flowing.
A breaker for an AC unit is a safety device that protects the unit from electrical overload. It automatically shuts off the power supply to the AC unit if there is a surge in electricity, preventing damage to the unit and reducing the risk of fire.
Yes
The recommended AC breaker size for a 240V air conditioning unit is typically 20 amps.
NO!
To wire an AC unit to a breaker box, you will need to connect the AC unit's wiring to a dedicated circuit breaker in the breaker box. Make sure to follow the manufacturer's instructions and local electrical codes to ensure proper installation and safety. It is recommended to hire a licensed electrician for this task if you are not experienced in electrical work.
The AC may be tripping the breaker due to an overload of electrical current or a short circuit in the system. This can happen if the AC unit is drawing more power than the breaker can handle, or if there is a fault in the wiring or components of the AC unit. It is important to have a professional inspect and repair the AC to prevent further issues.
Running a window AC unit inside a room can be unsafe due to potential hazards like electrical fires, poor ventilation, and increased humidity. It is recommended to use window AC units in properly ventilated areas to ensure safety.
Your AC breaker may be tripping due to an overload of electrical current, a short circuit, or a faulty breaker. It is important to have a professional electrician inspect and repair the issue to ensure safe operation of your AC unit.