That tells me the problem is with the outdoor unit. Most likely a dead compressor or fan motor. Additionally, your indoor and outdoor units are not on the same breaker.
Yes, it is recommended to keep both the AC breaker and furnace breaker on, especially during the respective seasons when they are in use. This ensures that the units are powered and can function properly when needed.
Your AC breaker may be tripping due to an overload of electrical current, a short circuit, or a faulty breaker. It is important to have a professional electrician inspect and repair the issue to ensure safe operation of your AC unit.
Your AC may be tripping the breaker due to an electrical overload, a faulty component in the AC unit, or a problem with the circuit breaker itself. It is recommended to have a professional HVAC technician inspect and diagnose the issue to ensure proper and safe operation of your AC system.
What size is the AC? Look at the power consumption rating of the AC unit; if it pulls anything close to 15 amps, a new breaker will not solve your problem. There should be an information panel that shows the current draw of the AC. If the AC pulls more than the breaker can handle, you need to re-wire the outlet for the AC. You can't safely just replace the breaker with a larger one since that would result in a fire hazard.
The purpose of an AC breaker switch is to protect the electrical system from overloads and short circuits. It functions by automatically cutting off the flow of electricity when it detects a problem, preventing damage to the system and reducing the risk of fire. In a household electrical system, the breaker switch is typically located in the circuit breaker panel and is designed to trip when there is an excessive amount of current flowing through the circuit.
If your AC won't turn on after flipping the breaker, it could be due to a faulty thermostat, a blown fuse, a tripped circuit breaker, or a malfunctioning AC unit. It is recommended to check these components and consult a professional if needed.
The AC may be tripping the breaker due to an overload of electrical current or a short circuit in the system. This can happen if the AC unit is drawing more power than the breaker can handle, or if there is a fault in the wiring or components of the AC unit. It is important to have a professional inspect and repair the AC to prevent further issues.
No
NO!
P=VI here P=8000 Watts v=220 V I=8000/220 = 37 A so you should use 37A Breaker
To prevent your AC from tripping the breaker, make sure it is not overloaded by running other high-power appliances simultaneously. Keep the AC unit clean and well-maintained to ensure proper airflow. Consider installing a dedicated circuit for the AC to prevent overloading the breaker.
Is the receptacle a 110 or a 220 outlet? If it's a 110, it needs to be a 220. Are there other appliances, lights, etc. wired on the same outlet? If so, you may have to re-wire so that no other appliances, lights, etc. are wired into the same breaker. Usually the larger appliances such as air conditioners, central heat systems are wired to a separate breaker or fuse.