The STX38 fuses are easy to find on a tractor. The fuses are located under the hood.
in the engine lol
To reinstall the hood springs on the STX38, first, ensure the hood is in a raised position. Attach one end of the spring to the hood bracket and the other end to the frame or chassis. Using a pair of pliers can help stretch the spring slightly for easier installation. Once both springs are securely attached, gently lower the hood to check for proper operation.
stx 38 fly wheel
Open the hood and look on both sides near the hinges. There is a spring on each side. Grab the motor end of the spring and pull the end off of the bracket. Once you have both springs removed, lower the hood about 3/4 of the way and pull the bottom front of the hood forward off the hinges.
Fram PH7575 is what I use on my STX38.
The STX38 uses standard 10-30 (any brand).
how do i check the hydro transmisson fluid on a stx38
remove hood from escort xr3i
I'm currently replacing my transmission pully in my yellow deck John Deere STX38. You can not get to it from under the seat. As far as I can see the only way is to drop the transaxle.
If you open the hood, there are 5 small nuts that hold that hood molding in place. simply remove those and you can remove/replace the hood molding.
lift the hood remove the shocks first then remove the bolts holding the hood to the hinges make shur you have someone to help you with this so that you dont hurt yourself or the car