There should be at least a 12 degree split between the incomming air and the air comming out of the vents.
55 degrees to 60 degrees
To properly prepare your irrigation system for winter by blowing out the sprinkler system, you should use an air compressor to remove any water from the pipes to prevent freezing and damage. This process helps protect your system during the colder months.
A viable email address is what works properly. The address must have a valid password and ID. It should be active and running properly.
Check the capacitor located inside the outside condensing unit,usually the fan,compressor are wired together,if one is running the other should be running
Check to see if the alternator is charging the battery properly. Use a voltmeter - if fully charged battery should read approx. 12.8 without engine running Should read approx. 13.8-14.2 with engine running if alternator is working properly
it means its not charging properly should be 12.6 -14.2 when running.
Yes -- speakers and amplifiers should be properly matched by power rating and impedance to avoid damage to either component.
doesnt matter,it want hurt.
With key on engine not running pressure should be 9 to 13 psi Engine at idle pressure should decrease by 3 to 10 psi on a throttle body. On a multi port injection key on engine not running pressure should be 41 to 47 psi. Engine running at idle pressure should decrease 3 to 10 psi. Central multiport fuel injection key on not running should be 58 to 64 psi. Engine running at idle pressure should decrease 3 to 10 psi. Central sequential electronic fuel injection key on not running pressure should be 55 to 61 psi. Engine running at idle pressure should decrease 3 to 10 psi.
If your fan clutch is working properly and your thermostat is good then it should not overheat.
You can determine if chicken is cooked properly by using a meat thermometer to check that the internal temperature has reached 165F (74C). Additionally, the chicken should have clear juices running out and the meat should no longer be pink.
To properly prepare your irrigation system for winter by blowing out sprinklers, you should use an air compressor to remove any remaining water from the system. This helps prevent freezing and damage to the pipes and sprinkler heads during the colder months. Make sure to follow the manufacturer's instructions and consider hiring a professional if you are unsure how to do it safely.