answersLogoWhite

0

Good question. I'm looking for a way to prime the pump before initial start-up of a Pontiac 350 that has sat for years. If, I were to have to change the pump, I would be looking at safely removing the oil pan, first

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you change the oil pump on a 1998 Pontiac grand am?

You will have to drop the oil pan to access


How do you change a oil pump on a 1989 Pontiac sunbird le?

Remove oil pan


How do you prime oil pump on an installed Pontiac 400?

pull the distributer out then usuing a tool and drill reach down in that hole and spin the drive shaft of the oil pump.,


How many quarts of oil in a 1971 Pontiac 400 engine?

6 with a filter change.


How do you change a oil pump on a 1972 Pontiac?

To change the oil pump on a 1972 Pontiac, first disconnect the battery and drain the engine oil. Remove the oil pan by taking out the bolts and gently prying it loose. Once the pan is off, unbolt the old oil pump from the engine block, replace it with the new pump, and ensure the pickup tube is properly aligned. Finally, reassemble the oil pan, refill with oil, and reconnect the battery.


What is the engine oil capacity of a Pontiac 400 engine - 1969 model?

6 Quarts with filter change


Does a 2000 Pontiac firebird have an oil pump?

All car engines have an oil pump.


How do you change the oil pump on a 1997 Grand Am 3100 v6?

You will need to drain the oil from your 1997 Pontiac Grand Am oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.


Where is the oil pump on a 2000 Pontiac Sunfire?

the oil pump is located inside the oil pan housing.


How do you change oil pump on a 2002 Pontiac Montana?

To change the oil pump on a 2002 Pontiac Montana, start by disconnecting the negative battery cable and draining the engine oil. Remove the oil pan by unbolting it from the engine, which may require removing other components for access. Once the oil pan is off, detach the old oil pump from the engine block, install the new oil pump with a new gasket, and reassemble the oil pan. Finally, refill the engine with oil, reconnect the battery, and start the engine to check for leaks.


How much oil does a 400 Pontiac engine hold?

A 400 Pontiac engine typically holds about 5 to 6 quarts of oil, depending on the specific model and whether a filter change is included. It's always best to consult the owner's manual or specifications for the exact oil capacity for your particular engine variant.


How do you change the oil pump in a Kia Sportage?

Oil pump change