If you are trying to do this in a pre 2008 (facelift) Mazda6, I purchased my bulbs from:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190510970759
and they can help you with a guide to remove it too.
Go to fixmysaab.com and search for interior lights center console. This provides photos and part numbers for bulbs for center console lights, including winter mode bulb, cigarette lighter bulb, central lock bulb and gear selection bulb. Bulbs can be purchased through www.thesaabsite.com
To change the shift bulb in a Nissan Pathfinder, first, disconnect the battery to ensure safety. Then, remove the center console or trim panel around the shifter to access the bulb socket. Twist or pull the old bulb out of its socket, replace it with a new bulb, and reassemble the console. Finally, reconnect the battery and test the shift indicator light to ensure it’s working properly.
To replace the center console bulb in a Chevy Aveo, first, ensure the vehicle is turned off and the keys are removed. Remove the center console cover by gently prying it up with a flat tool or your fingers, being careful not to damage any clips. Locate the bulb socket, twist it counterclockwise to remove it, then replace the old bulb with a new one, reassemble the console by reversing the steps, and test the new bulb to ensure it works.
To replace the bulb in the center console of a 1999 Dodge Neon, first, ensure the vehicle is turned off and the keys are removed. Carefully pry off the center console cover using a flat-head screwdriver or a trim tool to avoid damage. Once the cover is removed, locate the bulb socket, twist it counterclockwise to remove it, replace the old bulb with a new one, and then reassemble the console by reversing the steps. Always check that the new bulb works before fully securing the console back in place.
The shifter light on the center console of a 1999 Honda Civic can be reached by removing the center console assembly. Loosen all of the proper screws and pull off the assembly. Once the bulb is visible replace the unit using an appropriate sized bulb.
Toyota Camry 1999 model - replacement of interior console light
Begin by removing the 2002 Jeep Liberty shift console retaining bolts. Lift the shift console up and the light bulb will be visible. Take hold of the light bulb, push in and turn at the same time to remove it. Reverse the process to install your new shift console light bulb.
To change the light bulb in the gear shift indicator of a 2001 Nissan Xterra, first, disconnect the negative battery terminal for safety. Remove the center console by unscrewing any visible screws and gently prying it away from the dashboard. Locate the bulb socket behind the gear shift indicator, twist it counterclockwise to remove it, replace the old bulb with a new one, and then reassemble the console. Finally, reconnect the battery and test the new bulb.
See "Related Questions" below for instructions on removing it - I seem to recall once you get to about step 2, the lightbulb should be accessible.
How to change light blub in console on a Ford F150.
To change the window console bulb in a 1999 ML320, first, ensure the vehicle is turned off and the keys are removed. Carefully pry off the window console cover using a flathead screwdriver or a trim removal tool to avoid damage. Once removed, locate the bulb socket, twist it counterclockwise to release the old bulb, and replace it with a new one. Finally, reassemble the console cover by snapping it back into place.
If the light for the gear shift on the console does not work on a 2002 Toyota Camry, it is probably a burned out bulb. The console will need to come off to access the bulb to change it. This part is held onto the console area by screws.