Press the mirror inwards at the outer edge nearest to the indicator, in the same way you would if trying to adjust the angle to see a much wider view.
At the extreme end of the travel the mirror will pass inside two Philips screw heads that actually hold the indicator lens in place. Once removed the bulb can be replaced in the usual way.
how do i change indicator bulb in e class wing mirror
To change the mirror indicator bulb on a VW Golf MK5, first find the removable panel that covers the attaching screw. Removing the screw will open the panel to give access to the bulb.
The indicator bulb on the VW Beetle wing mirror is an LED which means the unit must be replaced. You need to remove the mirror glass to access the LED.
http://golfgtiguides.co.uk/guides/remove-mk5-wing-mirror-and-change-indicator/ see the above site...
To change the indicator bulb in the mirror pods of a Volkswagen Sharan, first, carefully remove the mirror housing by gently prying it off or unscrewing any fasteners. Locate the bulb holder inside the pod, twist it to release, and then pull the old bulb out. Replace it with a new bulb, ensuring it’s securely fitted, and reassemble the mirror housing. Test the indicator to confirm it's working properly before finalizing the installation.
Buy a bulb from Halfords, and get them to change it free....
To change the wing mirror indicator light on a Skoda, first, ensure the vehicle is parked and the ignition is off. Carefully remove the mirror cover by prying it off with a flat tool, being cautious not to damage the clips. Once the cover is off, disconnect the wiring harness and remove the old indicator bulb. Replace it with a new bulb, reconnect the wiring, and reattach the mirror cover securely.
how to repair a citreon saxo indicator bulb
To change the indicator (turn signal) bulb in the wing mirror of a Mercedes Benz CLK, first, ensure the vehicle is off and the key is removed. Carefully remove the mirror cover by prying it off with a plastic trim tool to avoid damaging the clips. Once the cover is off, locate the bulb holder, twist it counterclockwise to release it, then replace the old bulb with a new one, and reassemble the mirror cover securely. Always check the new bulb by activating the turn signal before finalizing the assembly.
To change the mirror indicator on a Citroën Relay, first, ensure the vehicle is turned off and disconnect the battery for safety. Remove the mirror cover by gently prying it off with a flat tool, taking care not to damage the clips. Once the cover is off, disconnect the old indicator bulb or LED by twisting or pulling it out, and replace it with a new one. Finally, reassemble the mirror cover and reconnect the battery.
Which bulb, exactly?
To replace the bulb in the side mirror indicator of a Subaru Outback, first, ensure the vehicle is off and safely parked. Gently pry off the mirror cover using a trim tool or flathead screwdriver to avoid damage. Locate the bulb socket, twist it counterclockwise to remove, then replace the old bulb with a new one, ensuring it's securely in place. Finally, reattach the mirror cover and test the indicator to ensure it's functioning correctly.