answersLogoWhite

0

The easy way is to replace the entire distributor with a remanufactured unit. The hard way is to mark position of distributor rotor, remove the distributor from engine,reome cap & rotor, remove drive gear from the bottom of distributor , slide shaft up & out, remove pick up.reverse steps & reset ignition timing. IMPORTANT TO MARK LOCATION OF ROTOR BEFORE REMOVAL

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What is the spark plug gap for a 1989 Chevrolet Camero 350?

.035


How do you change a distributor on a 1989 Ford F-250?

how do you change out the distributor assembly on a 1989 ford f250


Firing order on distributor cap of 1989 Camero?

If it's a V8 it's 1-8-4-3-6-5-7-2.


What is the location of the number one plug wire on the distributor of a 1989 4.3 Chevrolet?

Front left of the cap


What is the contact distributor points setting for a 1989 350 marine Chevrolet engine?

30 degrees dwell


Distributor cap firing order for 1989 Chevy camaro 305?

All 305 and 350 Chevrolet V8 motors are 18436572


What is the Spark Plug Gap for a 1989 Camero with a 350?

.035 inch


Where is the door lock fuse on a 1989 Camero?

In the fusebox, look in your owners manual if you have it.


What obd does a 1989 camero have?

It has obd 1It has obd 1


At idle my 1989 Chevrolet Camero runs rough and dies what could cause the problem?

If you have a check engine light "on" then you need to have it scanned for codes. It could be numerous reasons such as a vacuum leak, loss of fuel pressure, flooding,and the beat goes on.


How do you change the distributor on a 1989 Caravan with a 3L engine?

To change the distributor on a 1989 Caravan with a 3L engine, first disconnect the battery and remove any components obstructing access to the distributor. Mark the position of the old distributor to ensure proper alignment, then disconnect the wiring harness and remove the hold-down bolt. Lift out the old distributor and install the new one, aligning it to the mark you made earlier, and secure it with the bolt. Finally, reconnect the wiring, reassemble any components you removed, and reconnect the battery.


Will a windshield from a 1981 Chevrolet fit a 1989 Chevrolet truck?

No