open hatch, unscrew 2 black screws that retain the taillight housing. Gently pull housing away from body, untwist socket from lens, untwist the bulb. Reinstall is reverse of removal.
It is a Pontiac Aztek. Light a match and get some marshmallows.
The indicator panel should by carefully pried out. Then you can change the bulb.
In order to change the brake light, check your manual for directions. You will need to remove the cover and replace the burnt out bulb.
The 1997 Pontiac brake light fuse is located in the fuse box. The brake light fuse will be labeled as the tail light fuse.
my brake light stay on but emergency brake is unhooked
To change the center brake light on a 2007 Pontiac Vibe, first, open the rear hatch and locate the access panel on the interior trim near the brake light. Remove the panel by unscrewing or unclipping it, then disconnect the wiring harness from the brake light assembly. Twist the brake light bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble everything by reversing the steps. Ensure the new bulb is securely in place before closing the access panel.
The brake light fuses can be found in the fuse box. The brake light fuse will be in the second column, fourth from the top.
is your e-brake on?
there is a switch up under the brake pedal
what do you have to do to change the center brake light
Might be a stuck brake light switch its located at the top of the brake pedal
my air bag red light on all the time 2001 Aztec what i can do