0
When doing this job, a filter and fluid change is recommended. Remove the transmission vale body cover. Do this slowly to drain off the fluid in one of the corners. The filter is mounted to the valve body. The two solenoids sit together in the valve body. Unplug the wiring harness from each solenoid They are held in by a clip, you may need a needle nose pliers to help remove these clips. The solenoid A will have some light spring pressure pushing it out after clip is removed. After removing the solenoids, check to make sure both valve move freely in the body. Take care not to scratch the valve spool, or body port. They should move very easily. If all moves, wipe fluid off vale body, clean gasket area, put everything back together.
What else can I help you with?
How do you change out a solenoid in a 1997 Chevy 1500 its got a 4L60E transmission?
Starter solenoid?
How do you change the fuel pump on a 1997 Chevy truck?
How is the easiest way to change a fuel pump on my k1500 Chevy pickup
Where is the solenoid on a 1997 dodge ram truck?
on the starter
Where is the solenoid on a 1997 dodge Dakota truck?
starter solenoid is connected to top of starter
Where is the solenoid on a 1997 5 speed dodge Dakota truck?
The starter solenoid is part of the starter.
Where is the transmission censor located on a 1997 Chevy Cheyenne truck?
where is the transmission censor located on a 1997 Chevy cheyenne truck
Will a transmission from a 1997 Chevy truck fit in a 1995 Chevy truck?
I have a 1995 chevy 4x4 with 4l60e which is bad i have other 4l60e out of a 1997 chevy 4x4 will it work ?
Will a 1997 Chevy Van 4L60 fit a 1997 Chevy 1500 truck?
Transmissions
Can you put a 1998 Chevy transmission in a 1997 Chevy 1500?
From truck to truck, yeah, they are the same.
Would a 1996 Chevy truck 4l60e transmission fit in 1997 Chevy truck?
yes
Where is the pcm module for a 1997 Chevy pickup?
where is the pcm module located on my 1997 Chevy truck
Where does a starter solenoid get power from on a 1997 Chevy s10?
the starter relay.
