To change the drive belt on a Murray lawn mower model 13AN772S058, first, ensure the mower is turned off and disconnect the spark plug for safety. Remove the mower deck by taking off the retaining clips or bolts. Once the deck is removed, locate the drive belt routing and carefully slide the old belt off the pulleys. Install the new belt by following the same routing, and reassemble the deck before reconnecting the spark plug.
We will need some more details... Is it the drive belt or the belt for the blades?it is the drive belt for Murray lawn mower model 38618x92a
Yes, the Murray riding lawn mower model 42614A typically has an adjustment mechanism for the drive belt. This adjustment can usually be made by loosening the belt tension or adjusting the idler pulley to ensure proper tension and performance. Always refer to the owner's manual for specific instructions and maintenance recommendations for your model.
Yes, you need to change the oil in a Murray snowblower every 25 hours and before storage. It is also necessary to check the oil every 5 hours of use.
For the Murray Model 40508x92, the appropriate size for the blade drive belt is typically 1/2 inch wide and 88 inches long. However, it's always best to check the owner's manual or consult with a local dealer for the most accurate specifications and part numbers, as variations may exist.
Chad Michael Murray is a/an Actor, model
I changed the blade belt on my Murray mower. Now one blade stops and goes. If I lower the deck the blade stop . What did I do wrong?
Yup just change the hard drive
who makes murray leaf blowers can find a model # on my M200C
this model is rear wheel drive
State exact make and model.
Impossible to answer without knowing year, make & model, of mower.
Murray C. Richardson has written: 'The Wetland Object Model (WOM)'