the question is, how don't you remove new beetle ignition switch?
First unhook the battery. Then put the key in (you need it!) and turn it to "on." Remove the steering wheel and the ignition switch just slides out.
It is underneath the radio in the hazard switch itself. The relay is built into the switch
To remove the ignition switch from a 1978 VW Beetle, first disconnect the battery to ensure safety. Then, remove the steering column cover by unscrewing the screws that hold it in place. After that, locate the ignition switch, which is typically mounted on the steering column; disconnect the wiring harness and unscrew the switch from its mounting. Finally, pull the ignition switch out of the column to complete the removal.
howdo you change an ignition switch on a 1996 gmc jimmy howdo you change an ignition switch on a 1996 gmc jimmy
The cycle switch not engaging the Compressors clutch
You can change your 1995 Chevrolet ignition switch by removing the ring at the top of the ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
look here should be pretty much the same process http://forums.vwvortex.com/zerothread?id=822547
How do i change the ignition switch in a 1988 Chevy camaro
How change ignition switch in Lexus ES 300
The brake light switch is found behind the 1998 VW Beetles brake pedal. Reach it by removing the lower dash console to gain access to the nut holding the switch in place. Remove the nut then then the switch.
it is part of the hazzard light switch on the dash under the raido