help
remove the two nuts holding down the battery harness inside the fuse/relay center, then you can pull it out.
The fuse block under the hood needs to be raised. There are four tabs around the perimeter of the block. There are 2 small bolts that hold the fuse in place. Remove the 10mm bolts then simply pull out the fuse and replace it, reinstall the bolts and place the fuse block back in place. There are sliding guides that will align the block.
To change the main 120 amp fuse in a 2000 Mazda Millenia, first ensure the vehicle is off and disconnect the negative battery terminal for safety. Locate the fuse box, typically found near the battery or under the dashboard. Remove the old fuse using a fuse puller or pliers, and replace it with a new 120 amp fuse, ensuring it fits securely. Finally, reconnect the negative battery terminal and check that all electrical systems are functioning properly.
First, locate the fuse box. Then, once inside the fuse box, locate the 120 amp fuse. Remove it by pulling it straight out. Lastly, place the new one in place of the old one.
brake light fuse 2006 harley softail heritage
The Main fuse is in the fuse box under the hood on the drivers side. It is a 100 amp fuse.
More than likely a short in the wiring.
Mazda main fuse is bolted in with two M10 bolts. I know because I destroyed mine while trying to remove it. You will need a good socket set with a universal joint to remove it.
The CPU for a dome light on a Mazda 626, and most other Mazda vehicles, is located near the main fuse box. This is found under the hood.
In a 2007 Mazda 3, the fuse box is located in two main areas. The interior fuse box can be found under the dashboard on the driver's side, near the steering column. Additionally, there is another fuse box located in the engine compartment, near the battery, which is accessible by removing the cover.
Check the battery, cables, starter Check the main fuse.