Remove the window regulator assembly from the door.Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.Connect the window motor to the regulator with 3/16 in. rivets.Install the window regulator assembly.
You will have to replace the entire regulator assembly. The wire is not available.
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
You will have to replace the complete window regulator assembly.
It is a picture showing a complete assembly of the regulator. Its main purpose is to control movements of the window.
The window regulator assembly is not repairable, you will have to replace it if the metal wire has broken. Look on eBay they are around 40.00 for the whole assembly.
Remove the door panel. Remove the bolt that fastens the regulator to the window. Remove the 3 bolts that hold the regulator assembly to the door. Squeeze the entire assembly through the largest hole and replace with a new assembly in reverse order.
The window is not off track. The window regulator is broken. In most cases you will have to replace the window motor and regulator as an assembly.
The cables are not adjustable. The regulator is only serviced as an assembly.
You probably wont. Chances are, if your window doesn't go up and down right, you have a broken pulley in the window regulator assembly. This is common and requires the replacement of the window regulator.
You will have to replace the regulator assembly.
You will need a new regulator assembly.