Turn in clockwise and push in.
The radiator drain is located on the lower right inside corner of the radiator. It is difficult to reach, especially if you have large hands. The drain petcock is plastic with a rubber o-ring for a seal. It is a good idea to have a spare o-ring on hand as these are known to break easily.
The trans does not have a drain plug.
No.No.
To change the radiator on a 2000 Chrysler 300M, first, ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant by removing the drain plug at the bottom of the radiator and disconnect the upper and lower radiator hoses. Remove any necessary mounting bolts or brackets, then lift out the old radiator. Install the new radiator by reversing the process, reconnecting the hoses, and refilling with coolant.
Under the housing where the lower radiator hose hooks to the engine.
It is under the housing where the lower radiator hose hooks to the engine.
To fill the radiator on a 1999 Chrysler 300M, first ensure the engine is cool. Open the hood and locate the radiator cap; remove it carefully. Using a funnel, pour a 50/50 mixture of coolant and distilled water into the radiator until it's full, then replace the cap securely. Finally, check the overflow reservoir and add coolant if necessary.
It is located under the housing where the lower radiator hose hooks to the engine.
It does not have a drain plug. You have to remove the pan to drain fluid.
Yes.
No.
It is in front of the radiator.It is in front of the radiator.