To fill the radiator on a 1999 Chrysler 300M, first ensure the engine is cool. Open the hood and locate the radiator cap; remove it carefully. Using a funnel, pour a 50/50 mixture of coolant and distilled water into the radiator until it's full, then replace the cap securely. Finally, check the overflow reservoir and add coolant if necessary.
No.
It is in front of the radiator.It is in front of the radiator.
The thermostat on a Chrysler 300m 3.5L is located at the end of the lower radiator hose, near the oil filter.
5w305w30
Turn in clockwise and push in.
No.No.
On my '99 CVPI, it's on the overflow/fill tank that is attached to the radiator. The cap looks nothing like the old "radiator caps" from the 60s, 70's and 80's - it's plastic!
At the end of the lower radiator hose, near the oil filter.
It is on the coolant bottle, driver side of the engine.
It is under the housing where the lower radiator hose hooks to the engine.
It is under the housing where the lower radiator hose hooks to the engine.
It is under the housing where the lower radiator hose attaches to the engine.