0
take out the hose out of the radiator. then put a hose in the radiator hose, and let the car run with the heat on. it will take about 10 minutes. the coolant will be coming out of the radiator. then once the radiatior is leaking clear, you can put the hose back on, because it is flushed out.
What else can I help you with?
How do you drain the cooling system in a Pontiac Montana?
To drain the cooling system in a Pontiac Montana, first ensure the engine is cool and then locate the radiator drain petcock at the bottom of the radiator. Place a container underneath to catch the coolant, open the petcock, and allow the coolant to flow out completely. Additionally, you can remove the lower radiator hose for a more thorough drain. After draining, close the petcock and reattach any hoses as needed before refilling with fresh coolant.
Where is the condenser on the Pontiac Montana Mini Van 2004?
In front of the radiator. You will have to completely drain the cooling syystem, when it is cold, remove the fans and radiator, then you can access the condensor. You must have the A/C system evacuated before exposing the condensor to the atmosphere.
How do you let the water out of the cooling system on citroen dispatch?
To drain the cooling system on a Citroën Dispatch, start by ensuring the engine is cool. Locate the drain plug at the bottom of the radiator or the engine block and place a container underneath it. Open the drain plug to allow the coolant to flow out completely. After draining, close the plug and refill the system with fresh coolant as needed.
What is the purpose of the AC drain pipe in a cooling system?
The purpose of the AC drain pipe in a cooling system is to remove excess moisture that accumulates during the cooling process, preventing water from leaking or causing damage to the system.
How do you bleed the cooling system 96 acura 3.5 tl?
To bleed the cooling system on a 96 Acura 3.5 L, cool the radiator and remove the radiator cap. Loosen the drain plug and drain.
How do you bleed air pocket from cooling system?
drain the whole cooling system and refill it. You will never know if you don't give details of your car!
No radiator cap once you drain the radiator how do you flush the cooling system?
If you do not have a radiator cap once you drain the radiator, you can use several options to flush the cooling system. You can easily do this by filling up the system with as much water as you can and then warm it up.Ê
How to Drain cooling system on 2001 Dodge Intrepid?
Remove the lower radiator hose or loosen the radiator drain.
Where is cooling system block drain 2001 explorer 4.0?
there is no "block drain", just remove the lower radiator hose to drain the block
How do you drain the cooling system in a 91 Pontiac Transport?
how you doing ? first you need to go to a automotive store and buy a air vac. you'll have two fittings on the ac system. high and low out put ,the high out put is on the line and the low on the canister. hook up air vac to the canister fitting and hook air hose to the vac and this will drain the ac system
How do you replace the heater cor on a 2003 Pontiac aztek?
To replace the heater core on a 2003 Pontiac Aztek, first, disconnect the negative battery cable and drain the cooling system. Remove the dashboard and the center console to access the heater core housing. Disconnect the heater core hoses from the firewall, unbolt the heater core from its housing, and then replace it with the new core. Reassemble everything in reverse order, refill the cooling system, and check for leaks.
Drain the cooling system vauxall 1.9cdti?
pull off the lower radiator hose.
