0
Obtain the unlock code that was shipped with the vehicle. If you don't have the unlock code, your local dealership can pull the radio and look up the code with the serial number. Once you have the unlock code, then turn on the radio. You should see SAFE displayed. After about 3 secs, "0001" should appear. Use the station preset buttons 1 thru 4. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, press right side of "Seek" button for about 2 seconds, until an audible signal is heard. If you hose up and get the wrong code...will go back to SAFE displayed. You will get another chance to enter the code. After 2 failed attempts, you have to wait 1 hour again for it to unlock. So carefully enter the correct code the first time.
What else can I help you with?
How to enter vw beetle radio code?
To enter the radio code for a VW Beetle, first, turn on the ignition and the radio. If the radio displays "SAFE" or "LOCK," press the "TP" or "SCAN" button until you see the first digit of the code. Use the preset buttons (1-4) to input the code by pressing the corresponding button for each digit. Once all digits are entered, press the "TP" or "SCAN" button again to confirm, and the radio should unlock.
What do you have to do to reset the radio from 'safe mode' on a 2000 Volkswagen Beetle if the number starts with a zero and the radio doesnt have a zero .?
To reset the radio from 'safe mode' on a 2000 Volkswagen Beetle, you need to enter the radio code. If the code starts with a zero and your radio does not have a zero button, you can enter the code by using the other numeric buttons. For instance, if your code is 0123, you would press the buttons corresponding to 1, 2, and 3 in sequence. If necessary, consult your vehicle's manual for specific instructions or consider seeking assistance from a dealership if you're unsure.
How do you enter radio code on Renault laguna?
on the comand for radio enter your code
How do you enter the radio code for a BMW Z3 1998?
To enter the radio code for a 1998 BMW Z3, first, turn on the ignition and then the radio. If the radio prompts for a code, use the preset buttons (1-4) to input the code. For example, if the code is 1234, press button 1 once, button 2 twice, button 3 three times, and button 4 four times. After entering the correct code, the radio should unlock and resume normal functionality.
How do you find the code for a 1998 Honda accord radio and how do you enter it?
in order to get the radio code you must first take out the stereo and get the serial number off the back of the radio then call a Honda dealership with the VIN and proof of ownership and they can get you the code. You then enter the code using the preset buttons. GOOD LUCK!!
How do you enter radio code for Acura?
How to enter your2003 Acura tl radio unlock code
What to do when 1998 Volvo' radio panel reeds off?
Leave the radio turned on in this condition for several hours. Then enter a proper security code for your radio. If you don't have the code, you will need to contact a Volvo dealer.
How do you put in 1998 Acura CL radio code?
First you will need to get the radio code......i went to a Honda dealership to get mine. turn you radio on and enter the code with your numbered presets. The code will only have the numbers 1-6, it's pretty simple. Keep that code on hand cause you'll have to enter it anytime your battery may go dead.
How to enter radio codes for 93 Honda accord - I have the code?
Enter the code with the preset buttons on the radio.
How do you enter the code on radio Acura MDX 2003?
Use your radio Pre-Set channel to enter code
How to enter radio code 1992 Ford Laser radio?
In order to enter the radio code 1992 Ford Laser radio, you need to do the following: Locate the car radio serial number Visit the website for the Ford Radio Code website Enter the serial number, the model, and the year of the Ford Laser radio Submit the information and the radio code will be displayed Enter the code into the Ford Laser radioOnce you have entered the code, you should be able to access the radio again. Make sure you write down the radio code so you don't have to enter it again in the future.
How do you enter a security code for radio?
With the radio presets
