nail polish and a rag or rubbing alchohol
If your window is like my grand am the glue that holds the track and window together is not holding properly, so window keeps coming off track. I have not found a glue that holds yet.
To effectively remove glue from a window, you can use a mixture of warm water and dish soap to soften the glue. Gently scrape off the softened glue with a plastic scraper or a razor blade. Be careful not to scratch the window. You can also try using rubbing alcohol or vinegar to dissolve the glue. Remember to test any cleaning solution on a small, inconspicuous area of the window first to ensure it does not damage the surface.
glue hatch window latch
If the glass has detached from the clips/feet/whatever-you-call-them that hold the window glass to the rest of the assembly, you can re-glue it. You will have to clean off as much of the old glue as possible, then use a glue made specifically windows and situations like this - I think it is urethane based, and should be available at auto parts stores. Do this with the window up, and make sure you have everything in exactly the right place, operating the window to make sure. Once it is in place, leave the window up for at least a day or two to be sure the glue sets properly. A window being "off track" is often a case of the glue that bonds to the the glass simply wearing out over time and with use.
take it to a glass shop, it requires special glue.
take it to a glass shop, there is a special glue needed
Silicone adhesive is the best type of glue for bonding window glass.
Use a dab of cooking oil and rub the glue off then clean the mirror with window cleaner to remove oil. No harm to the mirror, works on any type of glass.
Most auto part stores sell a kit to re-glue the tab to the window.Most auto part stores sell a kit to re-glue the tab to the window.
If gluing paper to paper, white glue is best.
I have the same problem on my 1998 Ford Expedition XLT. I have put it back on track about 5 times and keeps coming off again and again. I'm going to use the same glue the windshield installers used. I'm going to buy a tube of the glue from them, this will resolve the window from coming off track.
An epoxy is best for this.