To remove a key from the ignition of a 1992 Audi, first ensure the vehicle is in the "Off" position and the steering wheel is not locked. If the key won't turn or release, gently wiggle the steering wheel while trying to turn the key to the "Off" position. If the key is stuck due to a dead battery or ignition issue, consider checking the battery or consulting a professional locksmith for assistance. Always refer to the vehicle's manual for specific instructions related to your model.
My 92 does have a computer chip in the ignition key.
er, there SHOULD be a key...separate from the ignition key...
cars with start a key in the ignition.
you dont! it has to be in the off position
This could be a bad ignition switch, ignition relay, or ignition fuse.
If it is a B8 it should charge in the ignition while the engine is running...
Most likely your ignition switch is bad
To reset the Audi A3 key fob, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the unlock button on the key fob for about 10 seconds, then release it. Finally, turn the ignition off and remove the key; the fob should be reset and ready to use. If issues persist, consult your owner's manual or a dealership for assistance.
A dealer can look up the ignition codes to make a key if one needs to be replaced on a 1992 Olds 98. A locksmith can also help but the ignition cylinder has to be removed.
2002 Audi quattro 1.8 ignition module location
My 92 has a safety feature where you have to turn the key to the off position, and then you must push the key in and turn one more time in order to release the key.
To reprogram an Audi A3 remote key fob, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position, but do not start the engine. Press the unlock button on the key fob for about 10 seconds, then turn the ignition off and remove the key. Test the key fob by pressing the lock or unlock button to ensure it is reprogrammed correctly. If this method doesn't work, consulting the owner's manual or a professional locksmith may be necessary.