answersLogoWhite

0

Just pull on it real, real gently, Neo.....

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Was The Matrix a book?

The Matrix is not based off a book.


What is the verb in this sentence. Hose off the car before soaping it?

hose off


Steps to flush heater matrix in Renault car?

easy way is to find where the water is go through the fire wall into the car, take them off and flush with a garden hose, but if badly blocked, you may end u taking the hole dash out. if you have aircon the heater matrix is behind the radio the air con matrix is behind the glovebox long job.


When you turn your heater on it blows hot air then it blows cold air If you turn the heater off for a few minutes and back on it does it again hot then cold What could be the problem?

The heater matrix could be blocked. Best option is to disconnect the two pipes going to the matrix, first finding the flow pipe (put your hand on the pipes to find the hottest one.) Once disconnected, backflush with a garden hose by putting it on the return pipe (the cooler one), and turn on the hose, flushing the matrix. Reconnect the hoses refill system.


How do you solve the pay off matrix?

please send me answer for me.....


How do you replace heater hoses for a 2001 Ford Taurus?

Cut off the crimp connectors, pull the old hose off and replace with conventional heater hose and conventional hose clamps


How do you repair a split coolant hose in a Ford Escort Ghia please?

Just take the clamps off of the ends and pull the hose off. If it resists coming off cut it with a knife. Replace the hose with a comparable hose and go to the parts place and get one that is exactly as the one that was split.


Why won't the hose turn off?

The hose may not turn off due to a malfunction in the faucet or valve, causing water to continue flowing. Check for any leaks or blockages that may be preventing the hose from shutting off properly.


How do you find inverse of matrix by elementary transformation?

Starting with the square matrix A, create the augmented matrix AI = [A:I] which represents the columns of A followed by the columns of I, the identity matrix.Using elementary row operations only (no column operations), convert the left half of the matrix to the identity matrix. The right half, which started off as I, will now be the inverse of A.Starting with the square matrix A, create the augmented matrix AI = [A:I] which represents the columns of A followed by the columns of I, the identity matrix.Using elementary row operations only (no column operations), convert the left half of the matrix to the identity matrix. The right half, which started off as I, will now be the inverse of A.Starting with the square matrix A, create the augmented matrix AI = [A:I] which represents the columns of A followed by the columns of I, the identity matrix.Using elementary row operations only (no column operations), convert the left half of the matrix to the identity matrix. The right half, which started off as I, will now be the inverse of A.Starting with the square matrix A, create the augmented matrix AI = [A:I] which represents the columns of A followed by the columns of I, the identity matrix.Using elementary row operations only (no column operations), convert the left half of the matrix to the identity matrix. The right half, which started off as I, will now be the inverse of A.


Ford Ranger lower radiator hose repair?

lossen the hose clamp on both ends of the hose. pull the old hose off then install new hose and 2 cllamps again


How do you change the power steering hose on a 1983 Chevrolet Camaro?

If it is the return hose it will have a hose clamp on each end. Loosen the clamps and pull the hose off. If it is the pressure hose you will need a 5/8 inch line wrench to remove the hose. A special line wrench is used because it will Not round off the shoulders of the nut.


How can I remove a hose from a washing machine?

To remove a hose from a washing machine, first turn off the water supply and unplug the machine. Next, use pliers to loosen the hose clamp and slide it down the hose. Twist and pull the hose off the connection point. Be prepared for any water that may spill out when removing the hose.