To get a transponder key, you can order a blank one online or buy it from a dealer or locksmith. To program it yourself:
Insert your existing working key and turn it to “On” (not start).
After a few seconds, turn it off and insert the new key within 10 seconds.
Turn the new key to “On” and wait for the security light to go off (usually takes a few seconds).
The dealership can generally program a new transponder key based on the VIN. Most good locksmiths can reproduce the key, but would need the original to do so.
how to program 2012 toyota fortuner
I don't program your transponder key. Try taking it back to a garage of the same type as your car e.g ford and they may be able to provide some help.
A Toyota Matrix transponder key is factory programed. At times this programing can fail. It is a quick process for the dealership to reprogram the key. A lost key and transponder will cost approximately $100 to replace depending on model.
Go to your Chrysler dealer and ask them to program it.
You can program a blank key for Mitsubishi Endeavor 2006 using Transponder Key Blank Fits.
You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.
Programmer and PIN code required
The dealer has to use his scan tool to do it.
To program a Toyota rav4 tansponder Key one must go to settings. Once in settings there is a programming button that will allow you to program the key.
Programmer and PIN # required
im guessing you need a flux capacitor......