0
You can usually tap into the 1/8"NPT hole on the rear rail near the distributor. Or, if you have to, you can use the 1/4" NPT hole just above the oil filter. That one jumps around a lot because it's so close to the pump, so only use it for general knowledge as opposed to exact information.
What else can I help you with?
Where is the fuse for the fuel gauge on 1998 Chevy blazer?
The fuse box for the fuel gauge on 1998 Chevy blazer is located on the driver side. It is near the hook latch.
Where is fuel gauge fuse on 1998 Chevy blazer?
The fuel gauge fuse on 1998 Chevy blazer is located in the front of the blazer. It is on the driver side next to the hook latch.
Where do you hook the oil line up for the oil gauge on a big block Chevy?
Right above the oil filter.
Is there a certain way to change the wiper blades on a 92 Chevy truck?
This question should really specify what kind of Chevrolet truck it is. In 1992 Chevy produced a C Series Pickup, K Series Pickup and S Series Pickup. That said, it appears that all three of these vehicles have the most common hook-style wiper arms which means you simply press a little tab where the blade is inserted into the hook and then pull the wiper blade out of the hook. The new one snaps right back in.
Where does temp gauge hook to block On 1985 350 Chevy?
It goes to the temp gauge which is usually screwed in the head between the manifold on the drivers side, or into the thermost housing on the intake manifold.
The wiring diagram for a 1991 Chevy S 10 stereo and what are the color codes to hook up an aftermarket stereo?
if you go yo a store that sells car radios they should have adaptor harnese for your chevy for oem hookup
How do you hook up aftermarket stereo in 1977 Lincoln?
on factory wire harnes, there are 5 speaker wires. 4 are (+). on speakers, but only one (-). when i hook up aftermarket head unit do i hook up all negative speaker wires together
As soon as you hook up hot wire to cigarette lighter the fuse blows on your 84 Chevy pickup why?
Load is too large for the circuit, or there is a short in the wire you are hooking up.
How many wires hook up to a 1991 Chevy pickup starter?
There should be two on the large terminal and one on the small terminal I believe the small terminal is labeled S
Where are the locations at to hook up aftermarket gauges on a 2000 Grand Prix GTP oil boost oil temp and water temp?
Your oil temperature gauge will connect to the oil pressure sensor. The water temperature gauge will hook up to the water temperature sensor. The oil pressure sensor will be on the left-hand side of the engine and the water temperature sensor will be on the front of the engine.
Chevy s-10 wiring diagram color codes to hook up a aftermarket stereo?
A Chevy S 10 wiring diagram, with color codes, can be obtained from most Chevrolet dealerships. The wiring diagram can also be purchased from most auto-parts stores.
Where do you hook up the water temp gauge on a 87'chevy 350?
The most effective location for a water temperature gauge on a vehicle is on the head or the side of the block. Generally, water temperature gauges are more accurate and fit better in these locations.
