The yellow with black stripe and the black wire next to it.
blue and black makes purple
Yellow , Black and white, Red and Black, tan and tan A B C D E
It is in the intake manifold near the thermostat housing. It is the one with the yellow and black wires.
Connect the black wire from the touch sensor to the black wire from the lamp. Connect the grey wire from the touch sensor to the white wires from the post. Connect the brown wire from the touch sensor to the remaining white wire from the lamp. The yellow wire is typically a ground wire and should be connected to the ground wire in the electrical box. Make sure to follow the manufacturer's instructions for proper installation.
On the intake manifold near the thermostat housing. It will be two wires a yellow and one black wire.
It is located on the air intake box there should be 5 wires. If your looking to install a performance chip in your 2010 tundra the two wires to use would be the black and yellow wire and the blue and yellow wire.
solid yellow is plus
It is in the intake manifold at or near the thermostat housing. It will be 2 wires, one yellow and the other is black.
The positive wires for IAT sensor on a dodge ram are the red ones. The black wires are are ones that serve as the negative cables.Ê
4 wires, the black ones are the O2 heater (on the sensor side), the white and green are the O2 sensor itself
on the transmission on top yellow and green wires poop