The yellow with black stripe and the black wire next to it.
This should be located on the airflow tubing going away from the air filter. It will be held in place by an alligator clip and plug directly into the airflow tubing. It will also be located on the firewall side of the tubing.
In the air intake hose leading to the throttle plate
I have a 2008 Cobalt 2.2 and it has came to my conclusion that the IAT sensor and the MAF sensor are integrated together. they are the sensor that plugs into the intake tube about 3 inches from the air cleaner box.
No
The Intake Air Temperature (IAT) sensor is incorporated into the Mass Airflow sensor. You cannot service the IAT sensor alone, you must actually service the Mass Airflow sensor instead. The Intake Air Temperature (IAT) sensor is incorporated into the Mass Airflow sensor. You cannot service the IAT sensor alone, you must actually service the Mass Airflow sensor instead. The Mass Airflow Sensor is located at the corner of the air filter housing where it meets the air intake duct.
P2173 High AirFlow/ Vacuum Leak Detected (Slow Accumulation).You have a vacuum leak in the intake manifold.P2173 High AirFlow/ Vacuum Leak Detected (Slow Accumulation).You have a vacuum leak in the intake manifold.
its called the MAS mass airflow sensor, and its right after your intake. its a big black peice with a plug on it that is part of your intake
will 1995 Chevrolet 350 intake fit a 1997 vortec heads
its the cable attached to the stock intake.
intake air temp sensor is inside the air cleaner housing. mass airflow sensor is on the air intake duct airflow meter is also on the air cleaner housing on 3VZ-FE V6 models
It should be in the air intake around the air filter box and the mass airflow sensor.
That's airflow sensor. Should be somewhere on your intake tube