With a key or from the inside.
If its the cables inside you need to remove the panels and replace the cables. You can in a pinch just disconnect them from the handle. Then pull them to release the door.
The diagnostics socket on a Toyota Corolla can be found inside the car. It is next to the hood release.
To open the hood on the 2000 Beetle if the hood release lever is broken inside the car, you can remove the glove compartment of the vehicle and find the release cable inside the dashboard. Pull the cable to open the hood. You will then need to replace the hood release lever.?æ
you might be able to get under the car somehow and flip the hood release from the inside.
it could need a greasing, but to be safe you should check it to see if any of the parts inside are broken.
It may not be broken, just the #1 and #2 solinoids inside the transmission. They can be replaced in situ. They can be tested by applying power to the connector plug on the outside. It makes the solinoids click.
If the plastic grip inside is broken off and ungripable,you may have to get needle nose pliers,or even vice grip,channel lock to avoid the recession of the post.
Use pliers and pull the cable...
If it is just the plastic handle broken, behind that is the cable that opens the hood. Just grab the cable with a pair of pliers and pull. You can probably just replace the inside handle and not have to run a new cable.
climb under there with a flashlight and a screwdriver and release the latch climb under there with a flashlight and a screwdriver and release the latch
It is not possible in order to open up the trunk from the inside of a 1994 Toyota Camry. In order to open the trunk of the vehicle from the inside, the seats will have to be removed.