answersLogoWhite

0

This has worked on my 2007 Chrysler 300

Programming Additional Keys.

Must have 2 Existing Pre-Programmed Keys.

1. Insert one of the pre-programmed transponder keys into the ignition lock cylinder and turn the switch to the ON position.

2. The key should remain in the ON position for 5 seconds but not more then 15 seconds before you turn it back to the OFF position.

3. Within 10 seconds, insert the second pre-programed transponder key into the ignition lock cylinder and turn the switch to the ON position. The VTSS(Vehicle Theft Security System) or Sentry Key Immobilizer System lamp (depending on model ) should start to flash. This along with a audible tone will indicate to you that the system has entered the "Customer Learn" programming mode.

4. Within 45 seconds, turn the switch to the OFF position. Insert the new transponder key and turn the switch to the ON position. After approximately 10 seconds an audible tone will sound and the Indicator lamp will stay illuminated for 3 seconds. This will be your acknowledgement that you have successfully programmed in the new transponder key.

5. To add additional keys, repeat steps 1 through 4.

2 PROGRAMMED KEYS MAY BE REQUIRED FOR SELF PROGRAMMING, PLEASE CHECK YOUR OWNERS MANUAL OR LOCAL DEALERSHIP FOR THESE DETAILS.

__________________

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you program a Chrysler 300 key Fob?

The Chrysler 300 key FOB must initially be programmed at the Chrysler dealership. You can use the Chrysler dealership FOB code to change the initial code to your personal code.


Why won't my key fob unlock my 2007 Chrysler 300?

Possible weak remote battery or failed remote.


How do you program key fob for Chrysler 300 without old fob?

The dealers scan tool is required.The dealers scan tool is required.


How do you program new key fob 2006 Chrysler town and country?

A scan tool is required to program a fob on a 2006 Chrysler Town and Country.


How do you program a 2008 Chrysler Key Fob with only one functioning fob?

The dealer scan tool is required.


Why doesn't my 2010 Chrysler 300 key fob work even after replacing the battery?

The fob may be defective or it may have lost programming.


How do you program a Chrysler key fob without the original?

The dealers scan tool is required.


How do you program a key fob for a Chrysler PT Cruiser?

I use the dealer's scan tool.


How do you program a key fob for a 1997 Chrysler Town and Country?

The dealers scan tool is required.


How do you change the battery in a Chrysler 300 key fob?

To change the battery in a Chrysler 300 key fob, start by using a small flathead screwdriver to gently pry open the fob along the seam. Once opened, remove the old battery, noting its orientation, and replace it with a new CR2032 battery, ensuring the positive side is facing up. Snap the fob back together securely, and test the key fob to ensure it works properly.


Replace battery in Chrysler 300 key fob?

Just call Parts, the battery costs $6.00 you can replace it yourself.


What is invalid key and fob on the 2007 Chrysler pacifica?

You have a failure with the key or the computer that senses the chip in the key.