You don't pull it off. You pull it out. If you are lucky, you can do it with the motor in. Pull the oil pan, and main bearing caps,etc...(long answer) not easy for the home mechanic.
how to get the crank shaft pulley off of a 03 Hyundai elanta GLS
Push in slightly on the door panel around the window crank area. Take a small hook shaped tool (can be made from a coat hanger) and pull out the C shaped clip that pins the handle to the shaft. Pull handle off shaft.
install 3.8 Chevy impala crank sensor passenger side , remove wheel and use pully to pull out crank shaft
To remove the window crank from a Toyota Echo, start by using a flathead screwdriver to gently pry off the decorative cover, if present. Once exposed, locate the retaining clip that secures the crank to the window regulator shaft and carefully remove it using pliers. After the clip is removed, you can pull the window crank off the shaft. Be cautious not to lose the clip, as you will need it for reinstallation.
No.
AnswerCheck the crank pully bolt. If it has come loose you will have a leak.The crank pully bolt does not have anything to do with the crank shaft seal leak. Thebolt is independent of the seal. To replace seal remove crank shaft pully and you will have access to crank shaft seal, pull out & replace seal.
I would recommend that you do put a crank shaft head on a crank shaft. Putting any other type of head on a crank shaft could possibly break the head.
Yes it can.
You need to first pull the flywheel/magneto off of the crank shaft. The starter clutch is attached to the back side of it with bolts.
Crank shaft
remove head pull shaft out
Pull the balancer then the seal. NOT EASY