answersLogoWhite

0

To remove the headlight housing (question is kind of vague, I have to assume this is what is being asked):

Open hood & remove center grill.

There are two bolts on each headlight housing on the inside, you will find them just behind where the grill was.

Remove the two on the headlight housing you are trying to remove.

Remove side marker light on the side you are removing the headlight from.

You will find two nuts holding the headlight housing to the frame, remove them.

Housing is now unbolted and can be slid out/off of the car.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How change headlight bulb on 1995 Nissan 240SX?

To change the headlight bulb on a 1995 Nissan 240SX, first, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector by gently pulling it off, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, ensuring not to touch the glass with your fingers, as oils can cause it to burn out. Finally, reinsert the bulb socket, reconnect the electrical connector, and test the headlight.


1996 Nissan 240sx check engine code 55?

Nissan 240sx


How do change headlight bulb on 1996 Chevrolet truck?

Remove battery, remove horn, remove wire, twist bulb counter-clockwise to remove.


Will tein coilovers from 1998 240sx fit on a 1996 240sx?

Yes they will, no modification needed.


How do you remove headlight assembly on a 1996 Cadillac deville?

To remove the headlight assembly on a 1996 Cadillac DeVille, start by opening the hood and locating the retaining screws or bolts that secure the headlight assembly. Remove these fasteners using the appropriate tool, typically a socket or screwdriver. Next, gently pull the headlight assembly forward to disconnect it from the wiring harness, and carefully remove it from the vehicle. Be sure to handle the assembly carefully to avoid damaging any clips or connectors.


How do you remove the drivers side headlight assembly?

That would depend upon your make and model. I know on my Nissan 240sx to actually disassemble the headlight itself, you have to remove the glue attaching the glass to the backing of the headlight. This is usually done by heating it up in some sort of oven. If your just looking to change a bulb, Google your make and model and you should find sufficient results.


Will the doors on a 1996 240sx fit on a 1992 240sx?

no, they will not fit. they are 2 different body styles


Where is dimmer switch on 96 240sx?

In a 1996 Nissan 240SX, the dimmer switch is typically located on the dashboard, near the headlight switch. It is usually a small dial or knob that allows you to adjust the brightness of the instrument panel lights. If you have trouble locating it, refer to the vehicle's owner's manual for specific guidance.


How to Replace headlight bulb 1996 camaro?

remove the retaining screws. pul oyt headlight and unplug it. plug in the new one and replace the retaining screws.


How do you remove the headlight housing in Suzuki Sidekick Sport 1996?

To remove the headlight housing from a 1996 Suzuki Sidekick Sport, first, disconnect the negative battery cable to ensure safety. Next, remove the screws or bolts securing the headlight assembly, which are typically located on the top and side of the housing. After that, gently pull the housing forward, disconnect any wiring harnesses, and finally, you can fully remove the headlight assembly from the vehicle. Make sure to handle the assembly carefully to avoid damaging any clips or connectors.


Why can you not get my 1996 240sx to crank?

why would we want to know


How do you remove the headlight lens cover from a 1996 ford contour?

I WA workin on my 98 contour last night and had to undo the headlight covers. if you want, i can email you a picture with my hand pointing to where the screws are to remove them. mike.ivers87@gmail.com