answersLogoWhite

0

you need a large pair of channel locks or brake spring removal tool, i use channel locks, but watch your knuckles ,those springs are knuckle busters !

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you remove the rear drum brakes on a 1998 Ford Escort?

How do you remove the rear drum brakes on a 1998 ford escort


How do you install rear drum brakes on a 1994 Chevy G20 van?

To install rear drum brakes on a 1994 Chevy G20 van, first, ensure the vehicle is securely lifted and supported. Remove the rear wheels and brake drum by loosening the retaining screws if present. Replace the brake shoes, ensuring to position the springs and adjusters correctly, then reinstall the drum. Finally, reattach the wheels, lower the vehicle, and pump the brake pedal to ensure proper brake engagement before driving.


How do you remove rear coil spring on 97 Ford Expedition?

How do I remove rear coil springs


How do you replace rear coil springs on a 86 Lincoln Town Car?

To replace the rear coil springs on a 1986 Lincoln Town Car, start by safely lifting the vehicle and securing it on jack stands. Remove the rear wheels and disconnect the shock absorbers to allow for suspension movement. Then, using a spring compressor, carefully compress the old coil springs and remove them from the lower control arms. Install the new coil springs, decompress them, reattach the shock absorbers, and finally, replace the wheels before lowering the vehicle.


How do you replace rear brakes on a 2002 Chevrolet Cavalier?

Remove the tire and wheel from your 2002 Chevrolet Cavalier. Remove the brake pad springs and calipers. Reverse the process to install the new brake pads.


How do you change the rear brakes on 1999 polaris 335 sportsman 4x4?

To change the rear brakes on a 1999 Polaris 335 Sportsman 4x4, first, elevate the rear of the ATV and secure it on jack stands. Remove the rear wheels and then take off the brake caliper by unbolting it from the mounting bracket. Replace the brake pads, ensuring they are properly seated, and reassemble the caliper. Finally, reattach the wheels, lower the ATV, and test the brakes before riding.


How do you remove the brakes on a Ford Ranger?

is it front or rear


How do you replace rear leaf springs on a 2000 ford excursion?

To replace the rear leaf springs on a 2000 Ford Excursion, start by safely lifting the vehicle and securing it on jack stands. Remove the rear wheels, then unbolt the U-bolts and shock absorbers attached to the leaf springs. Support the axle with a jack, detach the leaf springs from the frame, and replace them with new springs, reversing the removal steps. Finally, reattach the wheels, lower the vehicle, and ensure all bolts are torqued to the manufacturer’s specifications.


How do you replace rear pads rear rotors on 99 Toyota Camry?

Camry does not have rear disk brakes. It rear drum brakes. So you don't have to replace rotors. It's most likely that you don't need to replace drums too, but it might happen. To replace rear brake shoes you have to remove rear wheels. Remove the drums which might be not easy. You need to remove the springs holding rear brakes together. After that you have to remove four pins holding the shoes (one pin per shoe, two per side). Put new brake shoes. Installation is opposite to removal. PS: Make sure that you remember the position of each part when you are removing it. My 2003 Camry does have rear disk brakes, so you must follow the same basic procedure as the front.


How do you replace rear brakes on a 2007 buick lucerne?

To replace the rear brakes on a 2007 Buick Lucerne, first, lift the rear of the vehicle and secure it on jack stands. Remove the wheel and tire, then locate the brake caliper and remove the caliper bolts to detach the caliper from the rotor. Carefully slide off the old brake pads and replace them with new ones, ensuring to compress the caliper piston back into the caliper housing. Reattach the caliper, replace the wheel, and lower the vehicle before testing the brakes.


How do you change rear drum brakes on a 2003 Toyota Echo?

To change the rear drum brakes on a 2003 Toyota Echo, begin by safely lifting the rear of the vehicle and removing the wheel. Remove the brake drum by loosening any retaining screws and gently pulling it off; if it’s stuck, tap around the edges with a hammer. Replace the brake shoes by removing the springs and clips, then install the new shoes in the reverse order. Reassemble everything, ensuring all components are securely fastened, and reattach the wheel before lowering the vehicle.


Rear brakes shoes on nissin atimia?

to remove drums