First remove rear cover then remove cross pin bolt. Once bolt is removed then slide out cross pin. After cross pin is removed then use your fingers and spin the spider gears out.
3.73
If you look at the carrier you will see a big pin that goe's through the spider gears and carrier. Turn the carrier around until you see a small bolt on the right side of it. Remove the bolt that is what holds the pin in the carrier. Then pull the pin out towards you. Then push the axel's in and the c-clips will fall out. Then put pin back in so the spider gears don't fall out.
how do i remove an antenna to a 1998 chevy express 1500 van
HOW TO REPLACE A STARTER ON A 1998 CHEVY MALIBU
It would have 3.73 gears in it
60 to 66 psi
Have a fuel pressure test run.
How do you remove the steering wheel on a 1998 Chevy astro van
unscrew it
is it factory or an add on?
They are under the intake manifold.
The shift solenoid on a 1998 Chevy Blazer is located inside the transmission. To access it, you typically need to remove the transmission pan and filter. The solenoid is mounted on the valve body, and it controls the shifting of gears in the automatic transmission. Always consult a repair manual for specific instructions and safety precautions before attempting to work on the transmission.