Although this may not be an obvious solution to the problem, to remove the key from the ignition you should:
Notwithstanding this bluntness, in some vehicles there is an additional catch or button that must be released before the key can be removed. Hold this button or catch down whilst pulling key out at the same time. As well as this, the key can only be pulled out (in most vehicles) when the key is turned to the 'Off' position. Ensure it isn't on the 'Auto', 'On', 'Start' or any other setting when you try to take it out. also make sure the transmission lever is in PARK
1996 rodeo- how to remove key from lock ignition?
Push the key into the ignition. To remove, push in, then turn towards you to remove the key. I do not know how to remove and replace the whole ignition assembly in case that was your real question.
how to remove key stuck in ignition switch in Chevy colbalt
You have to have the key to that ignition to remove it. You can get a locksmith maybe. The dealership can make you a key from your vin# definitely good luck.
Find and remove the chime.
Remove the retaining ring from the top of your 1977 Chevrolet pickup truck ignition key tumbler. Slide the ignition key tumbler out. Remove the wiring harness from the end of the key tumbler.
Use the opportunity to replace the ignition. Key needs to be in On position for removal.
To remove the "key" ignition, insert a small screwdrived in the hole directly below the ignition in the column. You will need to have the key in the ON position otherwise the ignition will not come out of the column.
Removing a ignition lock cylinder from a 2002 ford windstar with no key
i have a 06 Chevy cobalt and can't get the key out of the ignition switch
See You-Tube Video : http://youtu.be/lBNUuO4ldfI How to Remove a broken key from an Ignition. Using the Broken Key Extractor Kit from: www.WedgeCo.com
To remove a key that is stuck in the ignition on a Peugeot 406 HDI, make sure that the car is in park. Then try to remove the key. If this does not work, spray the ignition mechanism with WD-40 after pulling out the key as far as possible. Then work the key in and out until it comes out.