To remove the trunk lock cylinder from a Dodge Neon, start by opening the trunk and locating the access panel behind the lock cylinder. Remove the screws or clips holding the panel in place and carefully detach it. Then, disconnect the wiring harness if present and use a flathead screwdriver to push the retaining tab on the lock cylinder, allowing you to pull it out from the trunk lid. Finally, reverse the process to install the new lock cylinder if necessary.
how to remove a door lock cylinder on 2000 dodge neon
There are screws under the fascia and matting in the trunk.
No, all Dodge Neon's do not have a trunk release. This was part of the option package offered on some of the earlier Dodge Neons.
How do you replace a slave cylinder on a 1995 dodge neon clutch
The jack and spare tire for a 2002 dodge neon is located in the trunk, under the trunk mat. The jack is located with the spare tire.
check to see if there is a botton to pop the trunk in the glovebox, i just got my neon and mine is in there.
call a lock smith
There is a trunk release inside the drivers door on the floor
To replace the trunk lock on a 2000 Dodge Neon, first, remove the trim panel inside the trunk to access the lock mechanism. Disconnect the electrical connector and any rods attached to the lock. Unscrew the lock assembly from the trunk lid, then replace it with the new lock and reassemble the components in reverse order. Finally, test the new lock to ensure it functions properly.
its possible that the lock cylinder is broken. if you cant turn your key that's what it is. its around $20 to replace. make sure you get keys to go with the cylinder.
The cover does not come off. The tail light is an assembly, that is removed as one piece. The fasteners are accessed from in the trunk.
Misfire in cylinder #2