should you drain oil in the car if the head gasket is blow
Repairing a leaking head gasket on a 1986 Suzuki Intruder involves several steps. First, remove the engine components that obstruct access to the head gasket, such as the fuel tank, seat, and any attached hoses or wires. Then, drain the engine oil and coolant, remove the cylinder head, and inspect both the head and engine block for warping or damage. Clean the surfaces thoroughly, replace the head gasket, and reassemble the engine, ensuring all torque specifications are followed to prevent future leaks.
unbolt the head pipe then the manifold.
Replacing the head gasket on any vehicle is a long and complicated process, however if you wish to see basic step-by-step instructions go to the related question on the right side of the page "How do you replace a head gasket?"
Somewhere around 500$ if done at a garage.
IF BOTH HEADS ARE REMOVED ABOUT 900.00
Intake manifold gasket may be leaking - check for loose bolts or replace fasket.
Hey Brad==This is an involved procedure. Get a manual on your car from the parts store and it will have pictures and everything. GoodluckJoe Replacing the head gasket on any vehicle is a long and complicated process, however if you wish to see basic step-by-step instructions go to the related question on the right side of the page "How do you replace a head gasket?"
Kenji Suzuki - footballer - was born on 1986-09-03.
change the head gasket. tard
the magneto
The 1986 model, DT75 Suzuki outboard requires an NGK B8HS plug, or equivalent, gapped to .034 in.
.035