0
What else can I help you with?
What was the original sticker price 1988 Mercedes Benz 560sl?
$61,300
Where is fuel pump relay on 1988 Mercedes 560sl?
The fuel pump relay on a 1988 Mercedes 560sl is located on the driver's side firewall inside the engine compartment. If a person notes the side of the air cleaner and follows this line back to the firewall, the fuel pump relay is located there.
How do you replace windshield wiper motor on a 1988 Mercedes 560SL?
under sterring column remove the 2 covers you will see 3 nuts and linkage remove and pull motor out from engine bay
What is the value of an excellent condition 1988 Mercedes Benz 560sl?
High retail for that vehicle would be aprox $26,500 according to NADA Guides.
Where is the turn signal relay in a Mercedes 560sl 1988?
In a 1988 Mercedes 560SL, the turn signal relay is typically located under the dashboard, near the steering column. You may need to remove a cover or access panel to reach it. The relay is generally a small, cylindrical component that can be identified by its electrical connections. If you're having trouble, consulting the owner's manual or a repair guide specific to the vehicle can be helpful.
What does a monovalve in an 1988 Mercedes-Benz 560sl?
In a 1988 Mercedes-Benz 560SL, the monovalve is a component of the heating and air conditioning system that regulates the flow of coolant into the heater core. It acts as a valve that opens and closes to control the temperature inside the cabin. When the monovalve malfunctions, it can lead to issues such as inconsistent cabin temperature or coolant leaks. Proper functioning of the monovalve is essential for maintaining a comfortable driving experience.
How do you tighten outside door handle on 1988 Mercedes 560sl?
To tighten the outside door handle on a 1988 Mercedes 560SL, first, open the door and remove the interior door panel to access the handle mechanism. Locate the screws or bolts securing the handle; these are usually found on the inside of the door. Tighten them securely, and ensure the handle operates smoothly before reassembling the door panel. If any parts are worn or damaged, consider replacing them for optimal performance.
How do you replace the front break rotors on a 1988 Mercedes 420 sel?
answer
How do you replace thermostat on 1988 535i?
To replace the thermostat on a 1988 535i, first locate the top radiator hose and remove the end connected to the motor. Take out the old thermostat and use gasket cleaner to remove the old gasket. Then replace the gasket and thermostat exactly as it was when it came out. Tighten up the radiator hose over the thermostat.
How do you fix an exhaust manifold gasket for a 1988 Chevy z-28?
If the exhaust manifold gasket is leaking the only fix is to replace it with a new one.
How do you replace 1988 Mercedes 560sl thermostat?
To replace the thermostat find the coolant elbow, it will be a rounded "L" shape towards the front of the vehicle. this will have two bolts attaching it to the block. Remove these two bolts and carefully pry off the elbow. Note how the thermostat sits in the elbow. scrape any excess gasket and be sure not to gouge the metal surface while doing so. install new gasket and thermostat, install elbow and two bolts and tighten (make sure not to over tighten).add coolant as needed to reservoir and run with radiator cap off for 10 - 15 minutes. shut the vehicle off and re-install cap.
How to replace a valve cover gasket on a 1988 Honda Accord LX?
just remove the 3 bolts on top of the valve cover and lift it out,and theres the gasket.
